When you buy through links on our site, we may earn an affiliate commission.
Search the Community
Showing results for tags 'ranger'.
Found 5 results
-
Freshly built Tudor Ranger 90220 "Oyster" Shield dial Built with the newly released Tudor ranger dial offered from Raffles this year. Its the most accurate option available for this reference If you are in the market for a Ranger. this is the way to go. All those butchered franken watches on eBay have terrible dials and hands and are selling for $1100+ Specs: Raffles Case set with flat case back with Tudor shield engravings. Clarks T12 acrylic crystal Raffles Ranger Dial - aged lume Raffles Time Ranger hands - aged lume Raffles Tudor 19mm Bracelet with Shield clasp Eta 2824-2 clone movement with rotor removed - manual wind Aged lume on hands and dial with air brush paint to achieve perfect match. Removed acrylic crystal and gasket - modified bezel to accept T12 crystal attempted to clearance inside case back but due to dial shape I was unsuccessful so it ended up being manual wind "oyster" greased gaskets and watch should be water resistant ( washing hands, showering , swimming) Thanks for your interest. As always questions and comments welcome.
-
I have been working on this Ranger for quite some time and it is just about done. Such a simple watch can be such a pain in the culo! Here is the reference and here is mine. You would think that the minute hand would be easy, but it is not. It needs to be 11mm and have fat lume. The one I have on there is 12mm and the lume is a bit too fat. Ingredients: Gen case (74XXX), crystal and bracelet (7835 with 361B endlinks) Gen movement (tudor 2824) with date wheel from an older movement Gen 6mm crown Unlumed Raffles hour and second hand Clark? minute hand Yuki dial (date window is a bit wrong! and frustrating to get to work)
-
This is a very fine specimen. What is interesting is that it looks like the lug holes are drilled out to accept fat bars; what do you think? Do 19mm fat bars exist? http://chronocentric.com/forums/chronotrader/index.cgi?page=1;md=read;id=60736
-
I am trying to make a ranger that is very accurate. My only missing piece is a minute hand that is 10.5 - 11 mm long like in the pic below. Do you know where I can find one? A submariner one goes up to the chapter ring.
-
Hi there, I have finally finished my ranger project and I am getting a little fogging under the crystal when washing dishes. I am wondering if there is moisture still in there from when I cleaned the threads for a new case tube with alcohol/ water. Anyway, the crystal is a Clark 25-123 and wasn't a very tight fit in the first place. I sealed it with crystal cement. The case is a Yuki 74000. Is there a better fitting crystal I should be using? Is there a chart with the measurements of the different crystals?
