Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Planet Ocean Ceramic Noob edition QC help


bvall

Recommended Posts

Hi guys! 

 

Just got my QC pictures and need your opinion about the pictures. I think it looks great overall but there is something that seems off with the bezel at 12 a clock. I have highlighted what I think looks off. I have asked for more pictures of the bezel and will post those when I get them. While uploading the pictures I noticed that the hour-hand is covering the omega-logo, I hope it wont be covered in the new pictures.

 

The pictures:

OoQPLHi.jpg

 

nlZxMAh.jpg

Here's what I think looks off, but it could probably be a reflection. The new pictures will tell.

 SpJrxJv.jpg

 

9J6Cum1.jpg

 

Thanks for looking! Please leave a comment :)

Edited by bvall
Link to comment
Share on other sites

Here's the new QC pictures. The "2" in "12" is a little bit low but I accepted this watch since this is such a small flaw and it wont be something that me or anyone else will see. I have seen the same on gen watches too. It's macro shots and a replica after all.

 

The pictures:

Ach76On.jpg

 

The pearl looks really good :)

o4IRfBO.jpg

 

zdUX9ZA.jpg

 

I will post wrist shots when I get the watch :)

Edited by bvall
  • Like 1
Link to comment
Share on other sites

The first one seemed quite good mechanically. +002 s/d is a great number. I think all Noobs have some small issues with the bezel paint. I currently have 3 Noob PO's and there's only one of which I find the bezel of acceptable quality.

Edited by j3t
Link to comment
Share on other sites

The first one seemed quite good mechanically. +002 s/d is a great number. I think all Noobs have some small issues with the bezel paint. I currently have 3 Noob PO's and there's only one of which I find the bezel of acceptable quality.

Yeah, but if you look at the graph, they were literally measuring for only a few seconds. It takes a while for the timegraph to settle in on an accurate measurement. The second watch was measured for an even shorter amount of time. All those pics really show is that the watch was running.

  • Like 1
Link to comment
Share on other sites

Here's the new QC pictures. The "2" in "12" is a little bit low but I accepted this watch since this is such a small flaw and it wont be something that me or anyone else will see. I have seen the same on gen watches too. It's macro shots and a replica after all.

The pictures:

Ach76On.jpg

The pearl looks really good :)

o4IRfBO.jpg

zdUX9ZA.jpg

I will post wrist shots when I get the watch :)

Is it just me or does that dial look way off center? It looks like the 12 is too far to the right when using sel as gauge. Also therefore the 6 marker looks too far to the left.
Link to comment
Share on other sites

Amplitude is low, beat error is not shown, watch running fast.

 

I would ask for a better/ longer reading as after all, the job of a watch is to tell the time to some accuracy...no?

 

I fact it would be nice to see a reading with the watch crown down ;)

Edited by ceejay
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up