Jump to content
When you buy through links on our site, we may earn an affiliate commission.

Leaderboard

Popular Content

Showing content with the highest reputation on 03/29/2021 in all areas

  1. I thought I'd try the Maranez on a Beads of Rice band. Wow! I'm in love.
    1 point
  2. Added 3-27-21: From: Where to get a case to fit a Yuki 3135 - The Rolex Area - RWG Question: "I have a Yuki 3135 movement in good shape and I'm entertaining the idea of building a watch around it." "In particular I keep seeing that a 3135-style movement will not fit into a case intended for a 2824 or similar ETA movement, which is what most of the stock out there apparently is geared towards." There are basically two variations of 36mm DJ type cases floating around: 1...Common cases made for swiss ETA 2836 and 2836 etaclones and/or various china DG/NN etc '21 jewel' movements. Because these movements started out as day/date movements, they are a little bit thicker than a 2824 date movement and the stem will be closer to the back of the case because of the thickness of the extra day of the week parts. 2...Cases made for swiss ETA 2824 and 2824 etaclones. They may be a little bit thinner overall than a 2836 case or they may be the same thickness as a 2836 case with the difference in movement thickness allowed for in the way they are machined inside the case. The newer 36mm DJ and DJ 41 cases may be made differently depending on the movement or they all might be the same. This goes for submariner type cases too except many DJ and submariners now come with 3135 clones so the Yuki 3135 may fit. I never had a watch with a 3135 clone, most of my projects used swiss ETAs. Successful projects that is. The problem is these cases are not always made to oem spec (or any spec) and there will be variations in cases made for the same movement...shallow reflector (aka 'rehaut') vs taller reflector, movement not centered in the case same as oem etc. For this reason there is really no set rule on what case will accept the Yuki 3135 clone. It is discouraging but that's the way it is...the replica world is basically 'Out Of Spec'. Ha! About all I have done is tell you what the pitfalls are so now maybe a member who has put a watch together using the Yuki 3135 will chime in with a few tips. 'More or Less Rules'... A case made for a 3135 will usually accept a 2824. May need a movement spacer. A case made for a 3035 will usually accept a 2836. May need a movement spacer. A case made for a 3135 will accept a rlx 15xx no date mvt. Without the calendar wheel spacer. A case made for a 3035 will accept a standard rlx 15xx date mvt. Rlx 15xx no date mvt will work if a calendar spacer is used but it will need a 15xx date center wheel, CP, and hour wheel or the hands may be too close to the dial. 'Hit or Miss Rules'... If you want to use a rlx 15xx date mvt without the date parts in a case made for a rlx 15xx date movement (MBK 5512/13 for example), you can get by with the standard date center wheel, CP, and hour wheel. You need to leave the calendar spacer on the mvt without the date works. If you use a rlx 15xx date movement in a case made for an ETA 2824 or rlx 15xx no date movement, you can remove the calendar spacer and all the date works and use it as/is in submariner cases because the hands setting high will not matter too much and the crystal should be high enough to clear the SS hand. On a '1016' etc it will not look right and the SS hand may rub the crystal. All rlx 15xx, 30xx, and 31xx are 12.5 ligne size in diameter (about 28.2mm) and an ETA 28xx is 11.5 ligne size (about 26mm) so if the case is a 'dedicated' ETA 28xx case it may not accept a rlx movement. The mm sizes are not exact but very close. Enlarging the inside of a case made for an ETA 28xx will not need much cutting because the difference only amounts to about 1.5mm +/- and this equals only a .75mm cut. 'More or Less Rules' come with a No Money Back Guarantee. Same goes for 'Hit or Miss Rules'. Question: "Can you put a clone or GEN 3xxx series movement in a 4-digit GEN case?" Only a few will fit. For example a 3035 with OPD dial will work fine in a 1500 case made for a 1570 date but a 3135 with OPD dial will not fit because it is thinner and the stem will not line up in the case tube. A four digit 16xx DJ is a mess because of the 'pie pan' dial and a flat dial (1016 etc) will work in some projects but I never tried it. The movement mounts a hair higher in a DJ 16xx case because of the 'pie pan' dial so a flat dial and 15xx without date works and calendar spacer might work. There is quite a bit of difference in the 3035 and 3135...as a rule of thumb the 3035 is the same size as a 15xx date mvt but the 3035 and 15xx date movements are thicker than a 3135 and will not fit properly in a case made for a 3135. Otoh...my first '1016' project used a no date rlx 15xx mvt without the calendar spacer in a 162xx case...this is the reverse of your question but it shows another possibility. Everything fits, movement, 1016 dial etc. Since no one makes a 3035 clone afaik we are stuck with genuine 3135/3135 clones and ETAs for other than '21 jewel' projects. What is needed is a pair of high quality automatic movements, one 19800 or 21600 bph with rlx 15xx dial foot holes and hand sizes and one 28800 bph with 3035/3135 dial foot holes and hand sizes. All 3035 and 3135 hands and dials will interchange up through the 36mm DJ etc but the bigger cases, DJ 41 etc use a movement spacer and the date is offset farther to the outside. It's a moving target.
    1 point
  3. Sent from my LYA-L09 using Tapatalk
    1 point
  4. Sent from my LYA-L09 using Tapatalk
    1 point
×
×
  • Create New...
Please Sign In or Sign Up