btocamelo
-
Posts
335 -
Joined
-
Last visited
Posts posted by btocamelo
-
-
8 hours ago, automatico said:
I've put it off for so long ... but I mostly have it completed. It will be a hybrid build .. I'm not going for the full on trying to make it look genuine. The hand set does not match the year of the dial .. no matter, I like the straight minute hand compared to the usual 1655 secs hand. Crown and tube, crystal... will be genuine Rolex parts.
I did realize back then that the 1655 bezel that Phong puts out is not GEN Spec, even though he swears by it. I don't know, maybe today's bezel ... so I had to find a used genuine, which you can tell are thicker. So it made me reluctant to by any future parts from him.
Quote -
10 hours ago, automatico said:
"I have a DW 1680 case set. Looking for parts, gen-spec ... not Yuki."
If 'DW' = David Wong...
I have a few DW 1680 cases and the main thing that is close to gen-spec on them is the case back on most of them. The case necks are a hair too small in diameter and the case sides are rounded like a DJ. All of mine came with spring wire bezel sets, not snap on like oem and because of the undersized case neck, fitting crystals can be a problem. Some DW cases also have undersize case back threads...oem is 30.9mm and most of my DW cases are 30.9 but some are 30.4mm. All of mine came with the gasket groove cut in the case back like genuine. The overall quality is good imho, other than spec accuracy.
Later Yuki 55xx and 1680 cases were very good imho. I read somewhere they came from VN but do not know if it is true or not.
Afaik they have been discontinued for quite a while.
"Would it be better to go with MQ instead?"
If it was me, I would keep after Ruby for a while...to save $$.
I pick that up that DW case set on Repgeek ... few months ago
I did pick up a Phong 1655 midcase many years age, his bezel was not equivalent to Genuine, so I found a Gen 1655 bezel with a ding... most the other Gen parts for the case I collected over the years, including 1570 GMT movement (posted over at the new HF)
I always remember Phong use to justify his expensive parts, and cases on using better stainless and specs compared to Yuki ... he would say "yuki ws garbage" .. LoL
I'm waiting for Ruby to reply ... because I want to see what they have for a complete 1680 bezel. Otherwise a GEN 1680 bezel assembly with insert runs about $1000 ... then I have to send it to Necky for case machine and placement
As far as what I see ... all the new and "close to spec" vintage Rolex case sets are coming from Vietnam ...
I have GEN White 1680 dial MK5 ... just need to get a hand set
Quote -
Look for VN gen spec parts ... already have Yodog builds, Phong cases. I have a DW 1680 case set. Looking for parts, gen-spec ... not Yuki.
Rubyswatch not replying to my email ... not sure if they were still active.
-
Sent Rubyswatch an email on their site for password, but no reply?
Is Rubyswatch in China and are they still on holiday? or are they in Vietnam?
Would it be better to go with MQ instead?
-
WM9 (father & son) dead...as well as Robert from PWC......the REP business is pretty dangerous...wonder who's croaking next?
-
Would like to see some photos and of the inside spring-bar tubes.
It's a shame, because the ones I bought from him last year had the "580" etched instead of stamped/engraved...like they should be. Also, I think these new ones allow for the fatter GEN springbars to fit.
They are quit good for the price
I will post a comparison shot with some gen 580
Engravings is correct (PT is not)
-
Yeah.....I doubted the factory would retool the machining process to produce an aluminum or a composite case for the 386.........brown fairy dust on regular stainless case....place in oven....cook at 400 degrees
-
It is safe to assume that it will not be that brown composite case color......it will just be the standard PVD stainless case like the 26K?
-
yep....me too....just checking to see if there was another source
like the majority of the forum i assume
-
Where did you source the 702 tube? It's aftermarket?
-
What would suck is that if for $5, the Clark Crystal is the same offering..........my belief on Rolex parts on ebay is....unless it's in the sealed Rolex packaging....it's not Rolex.
My question is....how could he have so many so-called "Rolex" crystals out of packaging??? That's like the Adam Sandler movie where the electronics sales guys says...."it's not Sony, but it's has "Sony Guts".....
-
Chinese do not use "Stanford Materials".....and "synthetic sapphire" = "mineral"..........don't get lost in the details and scientific definition of sapphire...and don't give any of these factories the benefit of the doubt....if it's "sapphire", they will list is as such....if it's "mineral", they will try and sugar coat it and re-term it...aka "synthetic sapphire"
-
That Patek is beautiful!!!............I got them all beat.....and it's a GEN!.....THE REAL GAYTONA!....$46,000
-
Kbiz mentioned that the WSO990 212 sapphire crystal he picked up a while ago was not very good....maybe you can post a review once you get yours....also, if it is sapphire and not mineral.
Just ordered the sapphyre for 212 at WSO990
Just ordered the sapphyre for 212 at WSO990
-
The crystal has good mag....my stock one has no AR, but the cyclops is a little sketchy....I would have to order one of these from DSN and see how the cyclops compares.
Also, waiting for Taka...he's suppose to put out an actual 2893 DW? (although the 2892 will fit)
hehe, I don't think Domi has anything to worry about!
Pretty sure it's the old school Honpo/EL case, and yes, this is DSN's latest one piece 6mm crystal....
-
very cool indeed, you're gonna put Domi outta business ...I have the same 63, but with some other parts...but in the end, it's my favorite PAM after the 29b and 57c...my favorite are sweep second PAMs
So the DSN crystal you used is his latest version with the 6mm cyclops? Is it a DSN or EL case?
-
yeah...Tony's custom knives are awesome....but way too friggin expensive for my taste....I'll stick to the standard microtechs, which are not cheap in their own right
Check out the "Mafione customs by microtech"
Next one will be a marfione customs by microtech
http://www.marfionecustomknives.com/
You have pm
-
Microtech or other automatic knives can be bought online...the UTX-70 is a small version compared to some of the other models like the Halo or Troodon....anyhow, you can buy it, even at a Gun & Knife Show....but if you want to carry it out in public, you better have a concealed weapons permit (at least in Florida)...and is subject to concealed weapons permit restrictions, just like a hand gun.
I have the Ultratech Tanto blade....it's bigger and a real nifty pocket knife...though I use it mostly for opening letters at home ...and I do have a CCW permit.
-
holy crap!!! that DW overlay looks awesome....put me down for a couple if you find them....right now, I actually need a GEN 1570 silver DW.
-
it's a tube pusher and presser....it's actually smaller than it looks in the photos....one side it for pushing out all manner of case tubes...like those on panerai and rolex daytona chrono tubes...any tube that is not screwed.
The other side is a press for pressing in the tubes....
both side have delrin plastic pieces to prevent scratching and marring of tubes....Fransciso over on RG uses this press extensively for various tasks...and as a small parts vise
-
is Uranus visible during that full moon?
-
if you want to go the extreme...this is the tool from Horotec for $135.00
-
Finally...that's great to hear...I thought the 2892 DW he has would fit as well....maybe the 2893 DW has a better fit or larger font?
-
check out the photos in this listing....see the crimped edge along the inside beveled edge of the crown.....this is an older crown though....but that's how these are suppose to look....this method of making a GEN crown requires much more specialized machine...compared to casting a crown, like REPs are.
Rubyswatch
in General Discussion
Posted · Edited by btocamelo
The crown, tube, bezel and dial will all be GEN .... in my build, I'm more interested in what appeals to me ..than about trying to be as close to genuine. The Priek crystal case back is a nice add on .. in my opinion.