lloyd

I would look at the balance jewel too. I had one with the identical problem from the retainer spring for the cap jewel being too loose. That allowed the shoulders of the balance shaft to hit the hole.

Get a pantograph engraver. That is what I use.

The case tube hole is too large to use a gen spec tube among other things.

You can actually get that case looking good. You can buy 1000 grit,1500 grit, 3000 grit, and 5000 grit sand paper at the Auto stores. Work your way through the grits with the CG removed then polish it with a Dremel felt wheel and polishing compound. It is actually 400 grit I use on the CG. I miss typed in the prior post. With it removed make long strokes going one way.

I use 600 grit sand paper going one way in a long stroke from one end to the other.

I bought one and it was unusable.

If you shorten the rehaut, it will be wider.

I hear that Rolex sells the best sub.

It was 35 pounds so 50 plus dollars. Still if he were really in a bind, I would give him the money. However, common decency says he owes me an explanation about what is going on. I PMed a moderator 2 days ago just to see what is going on, but I have not heard back from him. The guy I bought the movement from is a diamond member here.

That CG looks like the Noob one. The inside corners are very square and sharp. The one big difference between the Noob and H maker is the nut on the case tube. The Nood is a separate adjustable nut like the gen. The noob has the nut and tube machined in one piece. I bought a Noob 026 3 weeks ago. It has a lighter colored coating. The lume is white when it is not glowing, but it glows all the time. It beats my gen Omegas. The only time it is white is early in the morning. The rest of the time, it is glowing slightly green. Who are you getting it from? It is now my favorite watch.

Yep, I paid a member here 35 pounds for a movement by paypal on August the 17th. I have not gotten the movement yet, and he will no answer my emails any more. I never got a tracking number. It does suck when people let you down. As you said it is not the money as much as the broken trust.

Yep, this hobby is a waiting game at times. You have to be patient.

Come on, we are dying here. Where can we get a case like that?

I have a watch with a DLC coating. It is very hard and scratch resistant. The problem I have is that I work in clinics with the metal door frames and equipment. I will be walking along and hit my watch against something metal. Some times it makes a very tiny dent which pops off the DLC in a pin point spot. If you have a tool type watch. The scratches add character. On a dress watch, they don't look so good.

Will it hurt you financially? If not, get it if you want it.

You can not accept any more messages.

I am going to order a movement next week. I could probably help you.

my gold 2836 clones work great

I have 5 or 6 asian 2836 clones and so far gen parts go right in.

Actually people are getting Tacomas from the factory low on trans fluid. Mine was a quart low and the dealer did not even check. There are big threads about this on the Tacoma forums.

Stainless steel from a nuclear reactor would be very high grade.

All I can say about Rolex is lugholes forever. I only own models with lugholes. I like tool watches.

It is possible the movement was over oiled and a drop of oil got on the spring

I would be in for at least 2

One of the other docs I work with collects watches and he knows nothing about them. He has Rolex, Daniels and AP that I know of. When he wears a watch, he does not even know what model it is.