gregers

Having had a run of mechanical chronos fail fairly quickly, I decided to go down the same route as you. Got a quartz Porsche and a B&M and, Sod's Law, both of them died within 6 months. However, the Miyota replacements were easily obtained for around

I had a Porsche and Baume Mercier quartz with this movement (at least it is inscribed as this) after I got tired of malfunctioning mechanicals. Neither of them made 6 months. In each case the watch had been off the wrist for a over month and was just dead when I picked it up. Replacements are cheap and easy to pick up and are not especially difficult to replace. (Though I did carelessly manage to lose a second hand on the Porsche, and have just inquired in Watch Repairs if anyone knows its size)

Sorry, I forgot the important bit. It's a Miyota OS10. Black second hand. I think that it's 6mm long. Thanks.

I lost a chrono second hand on my Porsche Flat Six while doing a movement swap (I know, I know!) and I'm not sure what size it is. It's the quartz version and I don't know if it uses the same size as the 7750 versions. Anybody care to hazard an opinion? Incidentally, some of the cartel's quartz movements seem to be a bit iffy. I bought a couple of quartz versions after having a disastrous run with mechanicals, and both of them died before the six month mark.

Might be wrong but I can't remember anyone having problems with UK customs. Unless it's something really blatant that they can pull up, they are not all that interested - much bigger fish to catch than rep tiddlers.

Same here. I've had significant problems with every single watch apart from cheapo A21js. Not having access to a friendly watchmaker, the issue of QC has become a real problem for me. A21j's are the only mechanical watches that I am happy to buy without considerable forebodings about the potentially expensive outcome. As the OP pointed out, cheap replacement movements make A21js a worry free purchase.

I thought initially that the problem might be related to some combination of humidity/body heat. However, I think that it is fair to say that here in the UK high humidity is one of our least problematic climatic features. Your idea of silica is a sensible one and might work. It is still a puzzle as to how the moisture keeps building up, as I have been making doubly sure that the watch never goes near any water source. The amount of condensation that appears on the crystal is really quite substantial-to the point that it looks like it has been under water.

The first time that I wore my quartz Porsche Flat Six, condensation developed on the crystal. Odd, because it had never been near water. The moisture disappeared fairly quickly but continually reappeared after it had been on my wrist for a while. Assuming that somehow there must have been some ingress of moisture, I took the back off, removed the movement and left it exposed for a week. However, on resuming wearing it the same pattern established itself. The type of condensation that appears is not the usual 'misting' type, but is more like distinct, micro- droplets of water. These always disappears overnight when taken off the wrist, only to eventually return after various periods of use. I have had the back off several times but cannot eliminate the problem, far less come up with some credible rationale for its cause. Has anybody else ever experienced anything similar and is there a solution for this annoying problem, which is effectively making the watch unwearable?

I would find being limited to only five time zones a hindrance. Diesel really needs to up its game to attract the real movers and shakers like myself.

There is also a white faced variant. This is going to test my resolve to stay away from mechanical watches, though a complicated chrono might not be the safest option to go for!

Ok it's a 'fashion' brand, but it is one of the best looking pieces around. I've seen it advertised in many of the glossy mags and for me it stood out from practically all the other watches. I particularly like the red accents. I imagine that the two-tone bracelet might be a love or hate thing, though, but that could be rectified by the other strap shown above by AMK.

I've just got the white faced quartz version from Josh with rubber strap and also ordered a ss bracelet for it. Quality is absolutely superb and it really is a most striking looking watch. I deliberately chose the quartz rather than the mechanical version as I am sick to death of the problems I've been having with mechanicals. In fact, I think I will restrict all my purchases to quartz versions from now on. Apart from the convenience, the prices make them real bargain. I have also just got the Porsche Flat Six in quartz and that is outstanding.

Now that Ajoe's sadly departed, is there anyone else around who can supply replacement movements?

What do you estimate to be the most cost effective action - new movt (+possible cost of installation-presumably not too much) or a complete strip down?Would a strip down be pretty well the same as having a complete service ? In which case you kill two birds etc.

Thanks for that. So, with swapsies out, unless you have a willing watchmaker to hand it's sensible to stick to quartz

So what are the chances of getting a new movement for this (or any watch)? In theory it sounds a good idea-just drop in a new movt. for any busted watch. However, there are, presumably, a huge number of 7750 variants (size, spacings, seconds@6/9, etc.) and getting hold of the right version is not going to be straightforward. Or am I wrong on this?

Is it not basically the same as this 7750 mechanical version? Looks very similar. http://www.trustytime88.com/index.php?main...roducts_id=2315

Is it the same case as the 7750/Swiss quartz version but with a cheap quartz instead? If it is, then this is a very good buy. No point at all in paying for the expensive quartz. The cheapo variants do exactly the same job and can be replaced for pennies if they crap out.

Are there two variants with this particular bracelet? One which has an all SS case and one with a part PVD case?

Josh has remove the Carlos Coste and the TT3. Shame. I saw the TT3 in Goldsmith's and for me it was the outstanding watch in the shop. I guess they must be coming out of one factory and have all got QC problems

Looking at the prices it seems to be one of the cheaper models. Question is, who the hell is buying all these $1000 reps? It won't be me, that's for certain-unless they come with a five year, international, underwritten, guarantee.

This Montblanc is up on Josh's site here:-http://www.pc-80108.com/0000mb10008-timewalker-chrono-black-asia-7750-28800bph-p-4756.html Very handsome looking piece but what is it? It's not listed on the official MB site. Good to see a distinctive looking strap for a change, though.

Not sure that's a deal breaker.

Let us know what it's like when you get it. I'm quite interested myself. I'm not worried about the faux chrono. Although I love the look of chronos I don't think I've ever seriously used any of the 5 that I've got. Like you, I'm quite attracted to these basic 21j versions. Unlike the 7750's, it's not a disaster if they crap out and you can get cheap replacement movements anyway, should you wish to. It sounds like a potential top buy.

Curious. $250 dollar differential, yet there is no way that this can be accounted for by the movement. The case uses the same grade of ss so I don't know why the price difference is so huge. Is it possible that collectors simply ramp up the price of 7750s? Surely not. I'd quite like to know the reason, though.