369
-
Posts
146 -
Joined
-
Last visited
-
Days Won
1
Posts posted by 369
-
-
Hi mate,can you tell me if your date wheel is perfectly aligned?APs have been getting my attention lately. Guess it is the hobby. V7 diver today
Thanks
-
This is the most logical thing to doI've had one package go missing in transit and the seller and I worked it out to each take 50% of the loss. That seems the most logical.
In our case is was a gen dial and there was no disclaimer about shipping responsibilities involved.
-
-
Yes,the noob uses a2836,the only one with a2824 is the liquid metal!The V6 uses miyota 8215 non-hacking movement, but the decoration is very nice!The noob uses an A2836, without a day window. Other factories may use the 2824 or Miyota movements.
-
I think for this model the a2824 is better the difference is a2836 is a date-day and a2824 is only date!
Cheers
-
Guns n' roses - knockin' on heaven's door
-
Thank you mate,i appreciateA2836 movement.
Bracelet is excellent with screw links and a well-engraved clasp. It is very comfortable, as long as your wrist isn't an odd size. Some Omega bracelets are difficult to fit well, unless a combination of full and half links dials you in. This is not a fault of the reps but rather Omega's design.
Bezel action is smooth and the insert looks nice, with an excellent pearl. The surface on my current CrPO is a tad bit shinier than my last example but it looks good.
Lume shot:
-
I consider to pick one!Can you tell me if the bracelet and the bezel are well made?And is that a2824 or a2836?Yep, 42mm Noob.
Thanks
-
Amazing watch...is that the noob model?It's a 42mm?Lovely day in Ohio.
-
The other model has a nicer decoration but i don't like the non-Hack movement.
-
I think this is your watch ;Just found this website and this is my watch, and its much cheaper too!!!!!!
-
This is Ryan's site(amazing dealer) and this is not your watch the link is for PO with miyota movement and a new decoration i think you have the noob version with a2836.Just found this website and this is my watch, and its much cheaper too!!!!!!
-
Sorry...i missed that part
-
5?!?!I'm sorry mate! Let us know what your TD said!
-
Hi Mike, what do you think about the A7750 non chrono?(like Hublot 4000)
-
Thank you so much!Very nice watch...i think it's a noob versionjust dropped a photo on for you
-
Hi mate,can you show us a caseback pic?
-
Hi mate,nice watch...is that a miyota movement?Hello everybody, I'm a recently joined member, like everyone on here, i love watches.....
I have several replica Omegas and the latest one i have purchased was from Andrew at Trusty Watches. I bought a Ocean Planet Orange Bezel 45mm which i think looks very much like the real thing. The reason for buying? i had a look at a real Omega ocean planet and to be honest, i wasn't impressed. I honestly don't think they are worth paying £3800!! so i opt for this rep.
After i ordered the watch, i did find a few comments on line about the quality and Andrew as an individual. Some said "yea good watch, nice guy" others said he was a wrong un!!!!
It took nearly 3 weeks for my watch to turn up, and upon opening it, i find a small scratch on the bezel and the auto counter balance didn't spin 360 degrees. I contacted Andrew with my concerns and i feel as if i was palmed off a bit. He sent the quality control photos through as he does, but he obviously didn't check the counterbalance to see if it was ok. Oh by the way, it has a see through back (which i quite like)
He told me to allow the watch to "bed in' but after looking with a powerful magnifying glass, i could see a part of the counterbalance wasn't fitted properly and it was catching the lower casing so it wouldn't spin 360.
I sent him some photos (taken with my macro lens) which clearly shown the problem. I asked if i could send it back, but he instructed me to take the back off and slacken the screw holding the counterbalance, he said it was probably to tight.
As soon as i got the back off, it was obvious that the part was catching the lower casing. I managed to remove the counterbalance and with a pin head, i applied a spot of cyno glue to the gap and held it together. Once re-assembled it spins as it should do.
The reason for this post is not to complain, but rather show concern that some of these reps and their sellers don't really come with any sort of backup or guarantee. I would have been happy to post it back to him in China, but i got the feeling that he didn't want that. Lets face it, i could have damaged it taking it apart, its a risk i took, but i am quite mechanically minded.
heres a picture of the part at fault
Hope to have some good discusions
regards
Kev
-
I like this monster so much but i think is too big for my wrist!SeaMonster today!
-
Guys...this is amazing video!!!! Choose TD and stick with him!
-
-
Great job!!!
-
-
Monday Feb, 16th wristies
in General Discussion
Posted
PP for my sister's birthday