-
Posts
5 -
Joined
-
Last visited
Posts posted by havard.hagen
-
-
Thanks Legend,The flaws you stated are minor and common and easily fixed. The case thickness is the biggest visual tell in my opinion and this needs to be fixed to make the watch look presentable on the wrist. Surprised you didn’t mention it.
As for whether it’s a v3, a pic will tell.
Sent from my iPhone using Tapatalk
I really forgot to check the thickness
V3 is 10.5mm
V2 is approx 12.0mm?
A pic. Of this messurement should be included in the QC,
However I recived more QC pic. And the AP logo on the crown looks fine.
The rotor is very niced engraved.
The only flaw is at 12 oclock with a little gap at the bottom of the markers.
Thanks again for mention the thickness, will check that next time
Sent fra min SM-G950F via Tapatalk
-
Hello friends i am asking for your help
I have just ordered a 15400 JF v3 and just receved the QC pic.
I have no experience so I do not now what to look at.
But first, what is the main differents between a v2 and v3 from JF.
What I first was seeing on the QC v3 pic was a lovely and nice watch, then I notice a couple of "minor" things such as:
1. The two markers at 12 oclock on the dial were not paralell therfore a little gap between them was easy to see, not nice!
2. AP logo on the crown was a little off center.
3. Some of the screws on top of the watch were not smooth with the top. Some were down more than others, could be the angel and lightening of the photo...really not sure.
How to tell that the watch is from JF and a version v3? And not from another factory etc.?
What do you think guys, should I accept these minor flaws? Is it normal for v3, i guess my biggest issue is with my comment 1 above.
Thanks again for your view and ideas
Sent fra min SM-G950F via Tapatalk
-
To all who post watch pic. please write name of the watch + replica version and name of the factory.
Thanks to all
Sent fra min SM-G950F via Tapatalk- 1
-
Have you looked at bestreplica.srI'm very tempted to buy the ARF version, but wait for the Noob version to come out this year with 904L and clone of 7750 movement with all working subdials.
Do some have experiance with these watches?
Thanks
Sent fra min SM-G950F via Tapatalk
- 1
AP Picture thread
in The Audemars Piguet Area
Posted
How do you feel the thickness 16mm? Does it feel right?
My wrist is 7 inc only, i wonder if it will fit
Sent fra min SM-G950F via Tapatalk