Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

How to age lume?


MilSub

Recommended Posts

For enhanced patination (vintage appearance), I usually apply iodine to the lume & then bake hands in the oven at 550 degrees until golden brown (or as required)

finalhandset0011.jpg

0341-1.jpg

Dial lume I leave to a specialist. However, a fine coat of matte varnish applied to an entire dial will tone down the shiny bits on dials that should not have any.

Link to comment
Share on other sites

Those are the only two methods that i've ever heard of. Not sure how effective either method is. I would figure that the cigar smoke method would be the best looking result, but it seem to me you'd have to blow an awful lot of smoke in order to change the color. The coffee method seems like you are just painting the lume (using coffee instead of paint), and I'm not sure that you would get a natural looking result.

Link to comment
Share on other sites

@Freddy333 - Do you apply the iodine to the back side, or front side? Do you dab it with something like a Q-Tip, or dunk it or other?

It all depends on the effect you are looking for. For the Sub, I used a q-tip to coat the entire hand with iodine before baking. This tends to age the entire hand, which is good for diving watches (looks like the watch case may have been water damaged at some point many years ago). For the GMT, I used a toothpick to apply the iodine only to the rear of the lume, avoiding the steel as much as possible.

Enhanced patination is art, not science & you are pretty much making the rules up (to suit your needs) as you go.

1 other thing - when baking delicate hands, keep a careful watch as you bake. At 500+ degrees, the dividing line between perfection & ruin can be as narrow as a minute.

Link to comment
Share on other sites

  • 4 years later...

warning: i put iodine on my hands and it completely whipped the lume out.

Did you use tincture of iodine or providone iodine?

Tincture uses an organic solvent (usually ethanol) and that might be a source of your problems where providone is water based.

Unless by wiped the lume out you mean darkened it such that it didn't glow, which in that case this mod was kinda of supposed to darken the lume to look like vintage tritium lume while has no glow.

Link to comment
Share on other sites

  • 3 years later...
  • 9 months later...

Water-color markers work great and have boundless flexibility on a finished dial. If you are reluming you can add some pigment from a pastel artist crayon into the lume. Many colors simulation vintage. I just file some dust into the lume when mixing.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up