AllergyDoc Posted December 15, 2009 Report Share Posted December 15, 2009 With the talk about misprinted dials on the black/white version of the current batch of UPOs, I thought I would post these pics to get opinions. This is the watch Mary has purchased for me. (I'm still waiting on the rubber strap, which she is having trouble locating for some reason.) I think the HE valve is too low and the second hand isn't long enough. Pics from Mark: (I always thought it was a nice touch when Ruby would write your name on a slip of paper and include it with your watch photo. That way you knew she wasn't using a stock pic.) Link to comment Share on other sites More sharing options...
deniz21 Posted December 15, 2009 Report Share Posted December 15, 2009 yes man its definitly shorter on your first pics Link to comment Share on other sites More sharing options...
Demsey Posted December 15, 2009 Report Share Posted December 15, 2009 It's nice. But you're right, the second hand should reach the outer perimeter of the minute ticks, and the HEV valve is as far below the ten o'clock marker as it should be above. If you wanted to get anal (not that there's anything wrong with that), the lume is too 'green' to gen and the date wheel is too deep. It's a shame too, because people really notice these things in real life. How much? gen Link to comment Share on other sites More sharing options...
deniz21 Posted December 15, 2009 Report Share Posted December 15, 2009 man thats boring i ordered a swiss upo last week too from precious T,i ordered because the rep was so good, but this is not that good as it was Link to comment Share on other sites More sharing options...
AMK000 Posted December 15, 2009 Report Share Posted December 15, 2009 Date too recessed ?? Link to comment Share on other sites More sharing options...
lanikai Posted December 15, 2009 Report Share Posted December 15, 2009 man thats boring i ordered a swiss upo last week too from precious T,i ordered because the rep was so good, but this is not that good as it was Dun Worry !!!! No matter what UPO you get if it has the eta engine you will eventually want to "Franken it".. we've already started setting you up for chiefs next AR run.. with my spare rep crystal.. so yours doesn't have to be "down" and eventually you will want the gen dial and hands.. cutoms is not an issue .. I believe some members have a watchsmith in EU that can do the swap.. so no fear of crossing customs borders. this is my "Franken" UPO gen dial .. I opted not to get the gen hands .. Ziggy just re-lumed the hands to match the dial stregnth .. but the gen hands are like 35 usd.. the gen parts are not expensive considering it is a genuine brand name.. so just enjoy your rep for now.. when you are ready to build .. no worries .. the shipping of the parts is not a problem. I have the rep dials.. somewhere.. if I can find them.. I cannot promise that I will.. you can have them.. but like I say.. eventually you will want to go Franken.. as you evolve in this hobby.. that is the really fun part of rep collecting.. AC/Lani Link to comment Share on other sites More sharing options...
deniz21 Posted December 15, 2009 Report Share Posted December 15, 2009 hey lani i never seen a so optimistik and positiv thinking man like you but the thing is i bought another watch the doc also did, and he and maybe me getting not the watch that we orderd, thats the boring point for me i know i will get the best help in the word here, because you are around here thank you Link to comment Share on other sites More sharing options...
AllergyDoc Posted December 15, 2009 Author Report Share Posted December 15, 2009 Thanks everyone for the input. @Dems: $235 w/the rubber band as well. ETA-clone. Link to comment Share on other sites More sharing options...
plaifender Posted December 15, 2009 Report Share Posted December 15, 2009 I'm with Lani on this one. If you want to be really anal, you could send it back.. but if you plan on keeping the UPO for a LONG time you mind as well enjoy it as it is and opt for some genuine parts in the near future. Like he said.. gen hands and a dial would really make the watch almost perfect.. But then again on second thought... If the HE valve is indeed to low.. that's not really fixable. Since you didn't have one clean "straight-on" shot of the HE valve alignment with the dial.. i couldn't see if it's too low or not. If it is.. maybe you should see if you can get one with correct HE valve placement... Link to comment Share on other sites More sharing options...
deniz21 Posted December 15, 2009 Report Share Posted December 15, 2009 yes youre right, but hey look at it, and look at some revies of the watch, this isnt a upo for me Link to comment Share on other sites More sharing options...
AllergyDoc Posted December 15, 2009 Author Report Share Posted December 15, 2009 (edited) She hasn't shipped it to me yet as she says she's having trouble sourcing a good rubber strap. She did say she would source me a "Ultimate" PO. I've sent her an email requesting she get the right one. She didn't give me a straight on pic, but you can see in the 2nd pic the HE valve is too low. Edited December 15, 2009 by AllergyDoc Link to comment Share on other sites More sharing options...
collector26 Posted December 15, 2009 Report Share Posted December 15, 2009 My UPO also has a mis-printed dial. My 12 hangs to the right and my 6 hangs to the left but with the happy feet who cares. It looks like my second hand is the correct length. Like others have said I live with the dial because I intend the at the very least do a gen dial upgrade one day. I still love the watch and its in my regular rotation. Link to comment Share on other sites More sharing options...
lanikai Posted December 15, 2009 Report Share Posted December 15, 2009 just a short note on "alignment" in pics... it's is difficult to ascertain the 'exact" positioning of the object though a pic.. the slightest angle of the watch-lens ratio will make the object appear misaligned.. the HeV should be as the gen in real time.. once you get the watch .. it will be different from pics.. the second hand can be fixed.. again you Cannot" trust the pics due to the camera angle and the positioning of the case in relation to the camera.. this is SOP with our hobby .. the fixes can be what you really get into.. just ma .02 L Link to comment Share on other sites More sharing options...
Demsey Posted December 15, 2009 Report Share Posted December 15, 2009 @Dems: $235 w/the rubber band as well. ETA-clone. Good price, but what you're paying for. For another $60 you could have gotten ETA, correct HEV position, minute hand, aligned dial, magnetic cover, rubber strap with correct buckle from Joshua. These mods these others are talking about? To bring this up to speed? I guess. Even at cheap Ofrei prices? More than $60. Are you going to do the work yourself? More than more than $60. Personally speaking Doc? Your above 'entry level' watches to save $60. Did your property taxes go up again? Anyhoo, to be honest, there's not a watch in this whole thread I wouldn't be happy to wear as is.................. Link to comment Share on other sites More sharing options...
AllergyDoc Posted December 15, 2009 Author Report Share Posted December 15, 2009 just a short note on "alignment" in pics... it's is difficult to ascertain the 'exact" positioning of the object though a pic.. the slightest angle of the watch-lens ratio will make the object appear misaligned.. True. What I need is a straight-on shot. At least. Good price, but what you're paying for. For another $60 you could have gotten ETA, correct HEV position, minute hand, aligned dial, magnetic cover, rubber strap with correct buckle from Joshua. Josh's ETA-clone is $248 + 25 + 65 (rubber band) = $338 These mods these others are talking about? To bring this up to speed? I guess. Even at cheap Ofrei prices? More than $60. Are you going to do the work yourself? More than more than $60. Personally speaking Doc? Your above 'entry level' watches to save $60. Did your property taxes go up again? Anyhoo, to be honest, there's not a watch in this whole thread I wouldn't be happy to wear as is.................. I'm saving $100, and it should be the same watch as Josh's. I would not be doing any modding like this myself. But if I really like it, I would be willing to pay someone to switch out the parts and give the movement a service. "You're" Link to comment Share on other sites More sharing options...
P4GTR Posted December 16, 2009 Report Share Posted December 16, 2009 Don't buy that. If you are ok with those inaccuracies, get yourself a $100 45.5mm POrikka, save $120, and be done with it. With what you're willing to pay for that, consider yourself in for a penny in for a pound. Whether this is something you plan to mod or not, getting a correct case w/ proper He valve placement is a MUST at the very least (@ this price point) Don't do it. Link to comment Share on other sites More sharing options...
Demsey Posted December 16, 2009 Report Share Posted December 16, 2009 Josh's ETA-clone is $248 + 25 + 65 (rubber band) = $338 Buy this watch;http://www.perfect-hour.com/omse01004-planet-ocean-455mm-ssru-black-28242-p-4220.html $298 wear it out of the box. Take Mrs. AllergyDoc back to the reservoir. You'll have more fun there than at the Ofrei web page mulling over a genuine hand set. I would hope. Link to comment Share on other sites More sharing options...
lanikai Posted December 16, 2009 Report Share Posted December 16, 2009 gen dial~ 200 usd gen crystal~ 200 usd.... chief's 50 usd gen hands around 45 usd gen tube/crown~ around 45 usd .. SOP for funtion. gen bezel over 200 usd and the case would need heavy modding for the gen bezel to fit.. this would push the franken over the edge and too close to a genuine used PO.. Link to comment Share on other sites More sharing options...
arniezac Posted December 16, 2009 Report Share Posted December 16, 2009 All the hands are too short.The P and O on the caseback are too small and there appears to be extra engraving on the caseback aswell, I also can't make out a serial number on the lug. I've got doughts that this IS a UPO Comparing my UPO's He position to the one in pic 4 would have given the best comparison as to whether the position was correct. On this pic, however, the bezel has been turned 1 minute clockwise making a comparison a little awkward to properley call. Damn you perspective Link to comment Share on other sites More sharing options...
scotty Posted December 16, 2009 Report Share Posted December 16, 2009 I'd tend to reject it. It doesn't seem to be a UPO. All the reasons mentioned before - short hands (I agree; all look short), HE position, engravings. And for me date wheel looks low and the font looks off. EDIT - and the pearl is wrong. Omegas don't have raised pearls..... Link to comment Share on other sites More sharing options...
plaifender Posted December 16, 2009 Report Share Posted December 16, 2009 I was confused at first. I thoght you already had the watch in your posession! Good thing you don't! cancel the order and tell them you'll find the watch somewhere else. Or at least source you a proper UPO. I got my Swiss ETA (verified) UPO for $245 and it seems nearly perfect apart from single sided AR out of the box. Good luck and good hunting Link to comment Share on other sites More sharing options...
AllergyDoc Posted December 16, 2009 Author Report Share Posted December 16, 2009 $245 is a good price. Mary sent an email saying she ordered the right one and should have it tomorrow/today/hopefully soon. She's 8 hours ahead of me so it's hard to keep track of "today" and "tomorrow." I'm sure she'll sort it out. Link to comment Share on other sites More sharing options...
P4GTR Posted December 16, 2009 Report Share Posted December 16, 2009 Good. That other one is a mess. Link to comment Share on other sites More sharing options...
AllergyDoc Posted December 17, 2009 Author Report Share Posted December 17, 2009 Now THIS looks like the UPO! The dial printing appears to be straight on this one. Do you think so? The 12 and 6 appear to be centered. And, I decided to get one of these, too: Prolly won't be here before Christmas, though. Oh well. Link to comment Share on other sites More sharing options...
Demsey Posted December 17, 2009 Report Share Posted December 17, 2009 Nice watch, but if pfender can source the same @ $245 with verified ETA? I'd PM him. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now