ShawnBeever Posted September 10, 2010 Report Share Posted September 10, 2010 I want to drill out a set of 1016 lug holes, does anyone know the correct diameter for 1016 lug holes looking at a few I am guessing it is not the standard sub 1.2/1.3mm. Quote Link to comment Share on other sites More sharing options...
lhooq Posted September 10, 2010 Report Share Posted September 10, 2010 The 1016 takes the same diameter springbars as a Sub. They're just a bit shorter, so they don't fill the holes. Quote Link to comment Share on other sites More sharing options...
automatico Posted September 12, 2010 Report Share Posted September 12, 2010 "I want to drill out a set of 1016 lug holes, does anyone know the correct diameter for 1016 lug holes looking at a few I am guessing it is not the standard sub 1.2/1.3mm." I measured a submariner springbar and the ends are 1.2mm. The hole will need some clearance...so maybe 1.3mm or so. The center tube is 2.0mm. You can use regular submariner springbars...shorten them, round the ends off just a little bit, and polish the ends. DJ springbars are .9mm on the ends and the tube is 1.8mm Quote Link to comment Share on other sites More sharing options...
ShawnBeever Posted September 13, 2010 Author Report Share Posted September 13, 2010 Thanks for the information guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.