pampam Posted March 3, 2011 Report Share Posted March 3, 2011 Now this seems dumb. Was trying to swap a new crown into a Datejust with an ETA 2836. Now I can't seem to get the stem back in to lock into the movement. I assumed that it will just snap in once it was pushed into the ETA movement but that does not seem to work. Any ideas to help? Quote Link to comment Share on other sites More sharing options...
Jkay Posted March 4, 2011 Report Share Posted March 4, 2011 If you remove the crown and stem improperly (very very easy to do) you will upset the keyless machinery. It is easy to fix but the watch does need to be taken apart. Quote Link to comment Share on other sites More sharing options...
pampam Posted March 4, 2011 Author Report Share Posted March 4, 2011 If you remove the crown and stem improperly (very very easy to do) you will upset the keyless machinery. It is easy to fix but the watch does need to be taken apart. Ah.. Taking apart a watch . That's the next thing to learn LOL.. Thanks for the tip bro Quote Link to comment Share on other sites More sharing options...
plaifender Posted March 4, 2011 Report Share Posted March 4, 2011 You probably messed the Keyless works as Jkay said. Quite sensitive, but it should be fine. You need to remove dial and several pieces to get access to the keyless works. You might have pushed a little to hard. Good luck! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.