thelawnmowerman Posted October 24, 2006 Report Share Posted October 24, 2006 The Zigmeister I was hoping you could help me out with my problem, I have an FM conquistador alledgedly swiss ETA2892, which is running 2 minutes fast in 6 hours, how far dare I turn the adjusting screw , (I assume I must turn it to the minus ),can I turn it outside the confines of the scale printed around it, EG maybe a full turn. Thanks in advance Link to comment Share on other sites More sharing options...
RWG Technical Posted October 24, 2006 Report Share Posted October 24, 2006 Ziggy I was hoping you could help me out with my problem, I have an FM conquistador alledgedly swiss ETA2892, which is running 2 minutes fast in 6 hours, how far dare I turn the adjusting screw , (I assume I must turn it to the minus ),can I turn it outside the confines of the scale printed around it, EG maybe a full turn. Thanks in advance The screw is for fine regulation, about + - 20 seconds per DAY...you need to have a watchmaker put it on a timing machine and see what the problem is...it could be out of beat or in need of service... Fast running watches are normally those needing to be serviced, old or no oil equals friction, more friction means less power from the mainspring to the balance, less power, equals smaller swings, smaller swings equals a fast running watch... RG Link to comment Share on other sites More sharing options...
thelawnmowerman Posted October 24, 2006 Author Report Share Posted October 24, 2006 Thanks The Zigmeister I have contacted the dealer He has already told me to run it and see if it settles down , I'm not so sure it will , Link to comment Share on other sites More sharing options...
pro expert dan Posted October 25, 2006 Report Share Posted October 25, 2006 what you need to do is slow it down somehow. Link to comment Share on other sites More sharing options...
Rolexman Posted October 25, 2006 Report Share Posted October 25, 2006 (edited) Look at my signature for a simple explanation on fine tuning. Edited October 25, 2006 by Rolexman Link to comment Share on other sites More sharing options...
ajoesmith Posted December 4, 2006 Report Share Posted December 4, 2006 what you need to do is slow it down somehow. ah no [censored] expert dan???....... Link to comment Share on other sites More sharing options...
thelawnmowerman Posted December 4, 2006 Author Report Share Posted December 4, 2006 LOL I sent it back to the dealer PT and he's sorted it out for me. thanks for the advice guys Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now