DamonHorse Posted June 17, 2012 Report Share Posted June 17, 2012 Ok it's stupid question time. If I've got a watch that's tested to say 30m although actually that's not important really but it is tested and I take the back off and screw it back on is it still waterproof?? It probably sounds stupid to those who know but is it the case construction or something they do after putting it together? Thanks Link to comment Share on other sites More sharing options...
TeeJay Posted June 17, 2012 Report Share Posted June 17, 2012 As long as the gasket hasn't been damaged, and the caseback is securely screwed all the way down again, then it certainly should* be still waterproof *Nothing is 100% in this game but the odds're definitely in your favor Link to comment Share on other sites More sharing options...
shirotenshi Posted June 17, 2012 Report Share Posted June 17, 2012 If it was tested to 30m without any problem, than by screwing back the case back with the gasket properly in place should have it back to 30m. Link to comment Share on other sites More sharing options...
Jkay Posted June 17, 2012 Report Share Posted June 17, 2012 Screw it down finger tight, and then 1/4 turn more afterwards with a tool .. should be good. Link to comment Share on other sites More sharing options...
DamonHorse Posted June 17, 2012 Author Report Share Posted June 17, 2012 Thanks for this guys. Pretty dumb but something I needed to chek for obvious reasons! Much appreciated. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now