chris5264 Posted January 20, 2013 Report Share Posted January 20, 2013 very cool link,,,,,,thanks,,, Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 20, 2013 Author Report Share Posted January 20, 2013 Thanks MD. That is exactly what I used. It was very useful. Just doesn't explain what Rolexman is talking about Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 20, 2013 Author Report Share Posted January 20, 2013 Will do. Need to get that one dip stuff. I didn't clean the spring etc having read about rust etc. probably doesn't help! Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 26, 2013 Author Report Share Posted January 26, 2013 So, I completely tore it down again today. New main spring fitted and new pallet bridge. Now it runs again but the hairspring only moves in very short swings. Any ideas? Quote Link to comment Share on other sites More sharing options...
Jkay Posted January 26, 2013 Report Share Posted January 26, 2013 (edited) I looked over there but there didn't seem to be much going on so thought I'd get more feedback here. True RWG Masters use the View New Posts button; they don't surf to individual sub-forums. Edited January 26, 2013 by Jkay Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 27, 2013 Author Report Share Posted January 27, 2013 The main spring is brand new. I bought it as a complete set. I'll triple check but it all seemed ok in inspection. Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 27, 2013 Author Report Share Posted January 27, 2013 Seems like the hairspring is turning properly even with a blow of air. It's like something is stopping it. Resistance from somewhere Quote Link to comment Share on other sites More sharing options...
Rolexman Posted January 27, 2013 Report Share Posted January 27, 2013 Did you clean, check and oil both balance cap jewels? Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 27, 2013 Author Report Share Posted January 27, 2013 I've just realised what the issue is. The clamp for the balance jewel is broken so not holding it in properly. If I apply a small amount of pressure to the jewel the hairspring moves freely. Can you buy the clamps or is that the base plate ruined? Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 27, 2013 Author Report Share Posted January 27, 2013 Yeah that thing The other issue is I think I'm just having a problem installing the hairspring properly. I've been working on another 6497 movement this evening and am having the same issue. I can't install the hairspring so that it swing freely. Maybe I'm just not getting it seated properly? Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 27, 2013 Author Report Share Posted January 27, 2013 Yeah I think this is the issue on both (that spring still needs replacing though). I can't seat the mainspring properly on either. I managed to get it going correctly and just before I placed the bridge I knocked it and that was it. Arghhhh. I'm never going to manage this. Is there a trick to getting it in? I've been looking for videos but can't find anything. I did wind before placing it but I'm finding it hard to align the jewel stone with the pallet when I do that Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 27, 2013 Author Report Share Posted January 27, 2013 A video would be amazing mate. I've tried for two hours straight and going to shoot myself if I can't do this haha. It's soooo stressful. I desperately want it to run Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 28, 2013 Author Report Share Posted January 28, 2013 Ha tell me about it. I dreamt of hair springs last night. Not even my imagination would let me believe I'd managed to seat it properly. Charming. I'll try again tonight but if you get a chance of that video I'd be immensely grateful Quote Link to comment Share on other sites More sharing options...
thealphabeta Posted January 28, 2013 Author Report Share Posted January 28, 2013 You could do that yeah. I used a video hosting site and I steered it using IMG tags. Either woks IIRCThat's meant to say inserted. Damn predictive. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.