Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Just got a vintage Daytona 6263, but the stock band is not quite big enough....Options?


chasescott66

Recommended Posts

Presuming the micro-adjustment is at full length at the clasp (i.e. the last link is set to the very last set of holes), your only real choice is to add links.

 

In order to do that, you'd need to know what kind of bracelet you have; is it gen (i.e. 19mm 7835/78350 etc)? If so, is it with rivet links, folded links or screw pin links? Is it rep? If so... You would be well advised to know what the lug width is (there are some reps out there with 20mm instead of the correct 19mm) as that will effect the size of the clasp end links. Does your bracelet have solid mid-links, or are they hollow?

 

Getting the right size links sounds pretty straight forward, and for a genuine watch/bracelet it is; there's only a few options in that regard. But if you have a replica or aftermarket bracelet, that introduces a whole lot of other potentials and factors that need to be accounted for in order to find the right links to lenghten the band, as some links may not be suitable or compatible for certain bracelets.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up