How to order Rolex crown?

[ck5533]

I am looking for 2 gen Rolex crown for my 15200 cases (take cal 3135). 

 

I got measurements from another watch which has the similar tube and size. It fits on my 15200 cases perfectly. 

 

The tube reads 4mm approx. and the crown is 5.3mm approx.

 

Anyone knows the stock number? I need them to order from supplier?

 

Best of all, if you have spares or know who can supply them from here, please shout!

 

Thanks

 

 

 

 

[mymanmatt]

Stainless or gold?

[ck5533]

Stainless or gold?

SS

[ck5533]

http://www.esslinger.com/pdfs/rolex%20chart%20copy%20case%20number%20and%20crown%20number.pdf

 

I found this link from RG, very useful. 

 

so, the answer my question the solution is 24-530!!

[1680]

That's correct, however there are lot of people who exchanged it to a 24-603, it is the 6mm Twinlock crown that fits on a 5,3mm tube but due to its bigger size it is easier to set the time and unscrew the crown.

[mymanmatt]

I have seen the 1500 series with both crowns on them. The 6mm and the 5.3. The case tube is a little under 4.0mm. It is actualy a ladies case tube. The new crowns that are 6mm fit that tube. So, you can use the new style 6mm that will fit that case tube, or you can go for the 5.3MM crown, either will work. I have both the 6mm and the 5.3 mm aftermarket.

[ck5533]

thanks all but atm am only looking for gen parts. 

[flex]

get the crown from eBay and tube from clarks or similar supplier. flex

[ck5533]

I purchased 2X6mm gen crowns for both cases, turned out one of them did not fit my case..........   .......not because of the crown but one of the case tube has a bigger case tube! . I learnt my lesson. Next time, measure the tube first before ordering. damn it!

 

 

Now, which gen crown uses 4.5mm tube size?

[1680]

You need a crown for a 24-6000 or 24-6020 tube.

24-600 it is.

Edited May 26, 2013 by 1680

[ubiquitous]

Might have 2x gen 5.3mm crowns... I know I had some in my parts box, but may have tossed them in a round of purging as I don't have any need for them.

 

If I still have them, they're yours.

[prdubis]

Hi

I have a set of 530 crown and tube, sealed, for sale.

Let me know.

[ck5533]

Might have 2x gen 5.3mm crowns... I know I had some in my parts box, but may have tossed them in a round of purging as I don't have any need for them.

 

If I still have them, they're yours.

pm sent

[ubiquitous]

Had a look; I think I gave them out already    Thought I had them still, but I went through all my crowns and not a single one.

 

Sorry...

[ck5533]

Had a look; I think I gave them out already    Thought I had them still, but I went through all my crowns and not a single one.

 

Sorry...

No worries. Thanks for your effort. 

[ck5533]

Funny.

I used one of my friend 5.3mm crown on my case, but it wouldn't fit.

Now Im confused. What fits on 4.5mm tube? 

 

Worst scenario, change the tube to accept 5.3mm or 6mm crown.