marvin376 Posted September 3, 2014 Report Share Posted September 3, 2014 Hi, im looking for Rolex No Date 14060. Can someone help me find? regards from germany Kai Link to comment Share on other sites More sharing options...
dbane883 Posted September 3, 2014 Report Share Posted September 3, 2014 Other than gen, no acceptable ones were ever made. While the 14060 looks like a no date version of the 16610, it has a different case size, thickness, dial diameter. Completely different watch. Link to comment Share on other sites More sharing options...
droptopman Posted September 3, 2014 Report Share Posted September 3, 2014 One of my favorite models but as stated, no good reps of this model to be had. Link to comment Share on other sites More sharing options...
StormTooper4 Posted September 3, 2014 Report Share Posted September 3, 2014 Try Trusty and Trevor. Apparently Trevor's is the best one. Though they are probably the same. Depending on your disposition you may be like me where I'd rather have a watch on my wrist rather than none at all because the case is 1mm off and the font is a micron out. I think the main annoyance might be the lack of lug holes But Andrews has them http://www.ttw888.com/index.php?main_page=product_info&cPath=1_7&products_id=601 check out the Qc pics. I would check he has it in stock Link to comment Share on other sites More sharing options...
automatico Posted September 4, 2014 Report Share Posted September 4, 2014 I have an early no date timehead with sapphire crystal, 1.3mm lug holes, and swiss Eta 2836 that came with a solid link oyster but I wore it on a nato or velcro strap. It is an older model that says 'Original Roly Design' and 'Stawless Steel' between the lugs. Still have 3 or 4 nos from 1999/2000 around here somewhere. Sometimes I think I'm living in the Time Warp Looney Bin of Replicas because I have a 'collection' of nos replicas...36mm swiss Eta Air Kings, Exp I, 'River' SD, ihs GMT, Exp II, F520117 Noobs etc. Link to comment Share on other sites More sharing options...
StormTooper4 Posted September 4, 2014 Report Share Posted September 4, 2014 I have an early no date timehead with sapphire crystal, 1.3mm lug holes, and swiss Eta 2836 that came with a solid link oyster but I wore it on a nato or velcro strap. It is an older model that says 'Original Roly Design' and 'Stawless Steel' between the lugs. Still have 3 or 4 nos from 1999/2000 around here somewhere. Sometimes I think I'm living in the Time Warp Looney Bin of Replicas because I have a 'collection' of nos replicas...36mm swiss Eta Air Kings, Exp I, 'River' SD, ihs GMT, Exp II, F520117 Noobs etc. Everyone Knows "Old Skool Rules" Link to comment Share on other sites More sharing options...
Bc1221 Posted September 4, 2014 Report Share Posted September 4, 2014 Try Trusty and Trevor. Apparently Trevor's is the best one. Though they are probably the same. Depending on your disposition you may be like me where I'd rather have a watch on my wrist rather than none at all because the case is 1mm off and the font is a micron out. I think the main annoyance might be the lack of lug holes But Andrews has them http://www.ttw888.com/index.php?main_page=product_info&cPath=1_7&products_id=601 check out the Qc pics. I would check he has it in stock thats pretty nice. i would def check if its in stock. i dont think a lot of these are made these days since the ceramic version came out. id be interested in one too. seems to have a decent rehaut and nice lug holes. could be the start of a wonderful build. Link to comment Share on other sites More sharing options...
jmb Posted September 4, 2014 Report Share Posted September 4, 2014 I used to build a lot of these but I can't get the older style dials anymore. I do have a couple of the older version dials kicking around but they have the larger "maxi" markers on 'em. Although not 100% correct I sorta like the Maxis... Link to comment Share on other sites More sharing options...
marvin376 Posted September 4, 2014 Author Report Share Posted September 4, 2014 Are the MBW Case the best Basic for the watch? If so where can I find it? Link to comment Share on other sites More sharing options...
Bc1221 Posted September 4, 2014 Report Share Posted September 4, 2014 in thailand. really, thats about the only place. they pop up sometimes in M2M. usually modded and very expensive. Link to comment Share on other sites More sharing options...
marvin376 Posted September 4, 2014 Author Report Share Posted September 4, 2014 Okay, what should I looking for? Link to comment Share on other sites More sharing options...
alligoat Posted September 4, 2014 Report Share Posted September 4, 2014 You're going to be better off buying the rep from trustytime. Gathering parts will certainly cost you more- especially if you go for an expensive MBW 16610 case. JMB has the maxi dial, but as he said it's not really correct. dial, bracelet crown and tube hands, movement Case, By the time you get all of the parts, it'll probably be more than the $298 + $20 s&h for trusty's watch. And trusty's watch doesn't look all that bad- drill the lugholes and trim the cgs and you'll have a nice rep- esp. if it's WR! Link to comment Share on other sites More sharing options...
lionsandtigers Posted September 5, 2014 Report Share Posted September 5, 2014 move along, nothing to see here. dont bother. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted September 5, 2014 Report Share Posted September 5, 2014 it can be done. some experimental mods would need to be preformed. and the cost might be prohibitive. easiest, close enough solution. they make a 114060 dial with smaller markers or TC makes a 16610 sized 14060 dial (doubt itll happen now) then use any 16610 case. remove cyclops, get jmb to drill you some lug holes, get a pt 93150. DONE. yeah the watch would be a bit wider but its the best compromise vs using a 5513 case and trying to fit/mod a sapphire bezel assembly to work Link to comment Share on other sites More sharing options...
marvin376 Posted September 5, 2014 Author Report Share Posted September 5, 2014 You're going to be better off buying the rep from trustytime. Gathering parts will certainly cost you more- especially if you go for an expensive MBW 16610 case. JMB has the maxi dial, but as he said it's not really correct. dial, bracelet crown and tube hands, movement Case, By the time you get all of the parts, it'll probably be more than the $298 + $20 s&h for trusty's watch. And trusty's watch doesn't look all that bad- drill the lugholes and trim the cgs and you'll have a nice rep- esp. if it's WR! How much are the cost for the best Example?800-1000€? Gesendet von meinem iPhone mit Tapatalk Link to comment Share on other sites More sharing options...
StormTooper4 Posted September 5, 2014 Report Share Posted September 5, 2014 Sounds like your going the build route. But here's Trevor's version http://v.yupoo.com/photos/trevorwatch/albums/4137407/ Looks pretty decent , eta swiss for $258 Link to comment Share on other sites More sharing options...
marvin376 Posted September 5, 2014 Author Report Share Posted September 5, 2014 Make a Build sense when the Case is wrong? Gesendet von meinem iPhone mit Tapatalk Link to comment Share on other sites More sharing options...
marvin376 Posted September 5, 2014 Author Report Share Posted September 5, 2014 Sounds like your going the build route. But here's Trevor's version http://v.yupoo.com/photos/trevorwatch/albums/4137407/ Looks pretty decent , eta swiss for $258 Looks not bad,what are the flaws? Which mods Makes sense? Gesendet von meinem iPhone mit Tapatalk Link to comment Share on other sites More sharing options...
automatico Posted September 5, 2014 Report Share Posted September 5, 2014 It looks pretty good but the lug holes might be too close to the top edge to drill out. The next one might be Ok though. The bracelet looks Ok except for the half link. Overall not bad. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted September 5, 2014 Report Share Posted September 5, 2014 Make a Build sense when the Case is wrong? Gesendet von meinem iPhone mit Tapatalk some how i get the feeling you wouldnt be satisfied with it. i love 14060s and i know i wouldnt be satisfied with whats currently available. Link to comment Share on other sites More sharing options...
marvin376 Posted September 5, 2014 Author Report Share Posted September 5, 2014 Okay,that sounds not good.Is the Rep so bad between Gen? Gesendet von meinem iPhone mit Tapatalk Link to comment Share on other sites More sharing options...
jackflash Posted September 8, 2014 Report Share Posted September 8, 2014 Okay,that sounds not good.Is the Rep so bad between Gen? Yeap, go for a 5513 instead. Pick up a Cartel version from Perfect Clones. Get a dial and hand set from Yuki. Get an ETA 2846 off the bay. Bezel insert from Yuki/WSO dependant on whether you like the fat font look. Shape the crown guards on the case. Get a 703 crown and tube set from Athaya. Pearl either Yuki or Athaya. T19 crystal from Clark. Soften the bracelet and case, add a little patina as desired. The result will be a decent rep Link to comment Share on other sites More sharing options...
marvin376 Posted September 8, 2014 Author Report Share Posted September 8, 2014 Thanks mate,very informativ Gesendet von meinem iPhone mit Tapatalk Link to comment Share on other sites More sharing options...
Bc1221 Posted September 8, 2014 Report Share Posted September 8, 2014 you could just order the 1680 from PC or TT with the ETA 2846. then, all you would have to change is the dial, rework the crown guards (pretty easy to do if you know your way around a dremel), get a atheya 702 crown + tube (these tube should screw right in to a cartel case without being re-tapped), and a new plexi. watch will cost ya about $250 shipped. Yuki 5513 dial another $100 Atheya crown and tube $35 Clark T19 plexi $20 so about $400 bucks and youd have a pretty nice 5513. bezel you can always upgrade later. cartel bezels dont look too bad but id def recommend a new insert off the bat. too many options when you start getting in to modding. welcome to our madness. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted September 9, 2014 Report Share Posted September 9, 2014 Yeap, go for a 5513 instead. Pick up a Cartel version from Perfect Clones. Get a dial and hand set from Yuki. Get an ETA 2846 off the bay. Bezel insert from Yuki/WSO dependant on whether you like the fat font look. Shape the crown guards on the case. Get a 703 crown and tube set from Athaya. Pearl either Yuki or Athaya. T19 crystal from Clark. Soften the bracelet and case, add a little patina as desired. The result will be a decent rep very nice indeed! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now