Watch Guy Posted January 23, 2015 Report Share Posted January 23, 2015 Hi everyone, When winding my PAM510 this week, I noticed a rattling sound inside. When I removed the caseback, I discovered that the faux plate covering the movement is loose. I cannot determine how it is attached, however, it appears to be secured in the middle and wobbling or tilting, if that makes any sense. In other words, I can push down on the plate at the balance wheel and it moves downwards. I have tried removing it by prying it off, however, I was unable to and I do not want to damage the movement. I could take it to a watch repair shop, however, I am not sure they will know how to repair it since it is a faux plate cover. Any suggestions are greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Sirlordcomic Posted January 28, 2015 Report Share Posted January 28, 2015 I have a post on other forums in my sig on how to fix this issue. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Watch Guy Posted January 29, 2015 Author Report Share Posted January 29, 2015 Great. Thanks sirlordcomic. I will try to find it. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Sirlordcomic Posted January 29, 2015 Report Share Posted January 29, 2015 The gist is you remove the dress plate with 3 screws, then pop it off. Underneath are two very small screws both of which are probably loose. Once tightened they will secure the decoration to the movement. Then replace top dress plate. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Watch Guy Posted January 29, 2015 Author Report Share Posted January 29, 2015 Thank you very much sirlordcomic! Quote Link to comment Share on other sites More sharing options...
Sirlordcomic Posted January 29, 2015 Report Share Posted January 29, 2015 Good luck! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Watch Guy Posted February 4, 2015 Author Report Share Posted February 4, 2015 Took it into a local watchmaker who fixed it. Thanks again! Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Sirlordcomic Posted February 4, 2015 Report Share Posted February 4, 2015 Good news! Enjoy the watch. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.