Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

How do I get a GMT bezel to have this fade?


jfmiii

Recommended Posts

Guest REPPIN

I use bleach and a combination of 800 grit sandpaper and a scotchbrite pad to fade my bezels. 

The sand paper is really just to knock off the "sheen" and get them looking old. The scotchbrite mars it up and removes some of the paint off the inside of the insert where it meets the crystal. 

Then I soak it in straight, un-diluted bleach for anywhere between 5-30 minutes to get the desired look. Just make sure you don't leave it too long and monitor it closely. I've faded one to complete silver before on accident. 

Here is a tudor sub I just finished using this method (This insert was black when I stared ,and it faded to such a nice blue, that I used it on a Blue Tudor Sub!!!) 

. Ill try go get some pics of a GMT pepsi I did later if I remember! 

FullSizeRender.thumb.jpg.7d68c751e714b06

IMG_6490.thumb.JPG.ed5aaf551231717a2aa0d

Link to comment
Share on other sites

That is such a great solution to the dark blue insert dilemma I've been having with my 9041/0, most of rep inserts are way too blue purple & after you fade them they look really purple. Glad I stopped by!!

That's a really nice dial too, If you don't mind me asking where did you source it? The helenarou dial I have in my build is ok but again a bit too blue for a true Marine Nationale flake.

Link to comment
Share on other sites

Guest REPPIN

That is such a great solution to the dark blue insert dilemma I've been having with my 9041/0, most of rep inserts are way too blue purple & after you fade them they look really purple. Glad I stopped by!!

That's a really nice dial too, If you don't mind me asking where did you source it? The helenarou dial I have in my build is ok but again a bit too blue for a true Marine Nationale flake.

Its a yuki dial that I baked at 400 degrees for about 15 minutes. 

 

Then I applied some...ahem...ladies makeup from the wife to the whole dial to give it a nice matte, toned down blue. 

 

Really actually turned out well...whatever works right! 

Link to comment
Share on other sites

the old 'tincture of time' method is great

image.thumb.jpg.b71430ea340fb74e37d50941

image.thumb.jpg.7d1edac43b724c0e266179df

bleaching might work. with sandpaper etc. you might see too much bleaching at the edg

 

good idea to use a bleached black insert for a blue dial, as blue is difficult to work. looks great the tudor!

i put some nicotine on my blue dial,

before

image.thumb.jpg.02abc2d52bce5c0920db2461

in work

image.thumb.jpg.7e81c2921e4411326a42285c

after

image.thumb.jpg.bd742827151968022ceb3e51

image.thumb.jpg.885f8f57ab5899d5618288d5

with the dial i am fine.

  • Like 1
Link to comment
Share on other sites

the old 'tincture of time' method is great

image.thumb.jpg.b71430ea340fb74e37d50941

image.thumb.jpg.7d1edac43b724c0e266179df

bleaching might work. with sandpaper etc. you might see too much bleaching at the edg

 

good idea to use a bleached black insert for a blue dial, as blue is difficult to work. looks great the tudor!

i put some nicotine on my blue dial,

before

image.thumb.jpg.02abc2d52bce5c0920db2461

in work

image.thumb.jpg.7e81c2921e4411326a42285c

after

image.thumb.jpg.bd742827151968022ceb3e51

image.thumb.jpg.885f8f57ab5899d5618288d5

with the dial i am fine.

any interest in selling your GMT?  im looking to replace a 16750 i sold ~1.5 years ago.

Edited by jfmiii
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up