Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Rolex 6239 Daytona Review


Sub007

Recommended Posts

So finally after searching, searching and more searching I stumbled across this beauty, The Rolex Daytona 6239 (by DW) and bought it...in a heartbeat. I bought just the head as I thought the GEN rivet I will find one day for sure. But I wanted it to mount this icon on a Bulang & Sons 19/16 vintage leather strap. And I think the end result is really nice and it is also very comfortable to wear. 

The seller I bought it from also informed about a website detailing more about this particular build `Daytona small dial` 

http://www.hqmilton.com/watches/rolex_daytona_6239_black_dial_with_early_small_daytona_with_white_and_silve/

I especially like the fact that it is not screaming Daytona or PN or anything like `hey look at me`...but that is what I feel is so attractive about this particular dial. The subtle `Rolex Cosmograph Daytona` just between center of the watch and the coronet. 

What I also like about this build is that the hand wind movement allows for a very flat build (guess as per gen looking at the dimensions). The watch has wear on it just like you would expect but not too much. And the engraving finishes it off just right. Not fully noticeable even when wearing a leather strap. 

So now on to the pics

It all started with the watch head ....and even without a strap it is beautiful

IMG_3230.thumb.JPG.7e9a3d4e5710a7c1e92c0

But I knew I had to get a nice Bulang & Sons leathers strap for this beauty...

IMG_3198.thumb.JPG.72b0a086e9b6a9c660d5f

IMG_3199.thumb.JPG.c871629f16e12727766a2

IMG_3200.thumb.JPG.223653a909d3b5d5cd329IMG_3201.thumb.JPG.31495cfc1f76e4ff2e117IMG_3203.thumb.JPG.e5aea12e1a1e40a010eb9IMG_3206.thumb.JPG.ab277ba06f2ac44b11021IMG_3209.thumb.JPG.b9dc3d09c27076b76b188IMG_3214.thumb.JPG.1f1910c2fb2c260eea7bcIMG_3215.thumb.JPG.540c63ff419484567b3ffIMG_3212.thumb.JPG.6ee9a6df2f185b230f31cIMG_3213.thumb.JPG.bf3251b599684629ca48aIMG_3227.thumb.JPG.89b6a0827a7c94b7d5751IMG_3226.thumb.JPG.651b461f7e064b12fff60IMG_3224.thumb.JPG.d81b9641133fefa7300ca

IMG_3223.thumb.JPG.7cd46473d0e6bada9c490

IMG_3228.thumb.JPG.edeebbd347e5eaeabf060IMG_3229.thumb.JPG.038598b84e0ff05fc3bd9IMG_3210.thumb.JPG.f43d5d4c4442ccf31b29dIMG_3211.thumb.JPG.bff12726f963e18abcb0cIMG_3232.thumb.JPG.e41eb404982bf9e05ae45IMG_3235.thumb.JPG.d40f24e19d4e754a672c7

 

Edited by Sub007
  • Like 1
Link to comment
Share on other sites

Impossible to say without trying them. The problem with aftermarket cases is that there is little or no quality control or consistency of parts. A gen tube or xtal may fit perfectly into 1 case, but they may not fit in the next case from the same source. Because the crown fits onto the tube (not the case), a gen crown will fit a properly installed gen tube. Most (not all) of the time, you can get a gen tube to fit into most cases. However, you may need to retap the threading since in the case depending on the type of threading used for the original (aftermarket) tube. But, again, the only way to know what gen parts will fit YOUR case is to try them on your case.

There are hundreds of construction threads on RWG that you can research via the Search. I would recommend you do that. Also, check out the pinned articles in the Watchmaking forums.

Link to comment
Share on other sites

"Question, what mods would you suggest? I have gen 703 crown and gen 7030 tube...would these fit ??? Plexi T-21 ???"

The 703 crown and tube is all wrong for the 6239- it should be a 600 series crown and tube. You might be able to fit a gen 24-600 crown in your existing tube, but you have to be careful removing the stem from the movement- I boogered up an a7750 in a 6238 rep doing it.

Plexi T21 can be made to work, but you will have to enlarge the bezel some- DW bezels are notorious for being slightly undersized.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up