GenTLe Posted November 22, 2015 Report Share Posted November 22, 2015 This week I finally got the new ZF iw5001-14.The "check on arrival" process showed me that the all was working but the date was changing between 8.30pm and 10pm.So today I fixed the hands so that the date change is midnight sharp and I regulated it to keep good time.It looks a well made movement to me. It is stable face up, vertical crown left, up and right. It gains around 10s/d when face down.It autowinds in both directions (like an eta 2824, unlike the Miyota ones or the 775x).The stem is easy to extract and reinsert with a bit of care that is always needed in this task, starting from time regulation position.It looked clean, but a bit dry of oil... I put a bit of Moebius ones where I could (didn't want to service it for now).Also the rotor screw was quite loose... Not the others.At the beginning I thought that the bezel has to be removed to extract it from the case, but luckily the case back removal is enough.Now some pic.Before and after regulation:A couple of pics of the movement and hands alignment after the repositioning.Cheers, GenTLe 2 Quote Link to comment Share on other sites More sharing options...
SSTEEL Posted November 22, 2015 Report Share Posted November 22, 2015 Great job Yes, the movements in these are pretty good, however I am seeing more and more being booked in with either loose movements, or noisy rotors. The noise seems to be resonating from the rotor through the actual movement and the way its clamps down. The sound of the rotor can be dampened using some clamp pads. Quote Link to comment Share on other sites More sharing options...
sacsah1 Posted November 22, 2015 Report Share Posted November 22, 2015 Bravo. I wish someone could do the following QC checks in the USA. I simply love this watch.Sent from my LG-H901 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rolexman Posted November 22, 2015 Report Share Posted November 22, 2015 Thanks. Looks solid!I have one coming in. Hopefully I will get it before the holidays. Will service it upon arrival and will do a review if it hasn't been done yet on other fora? 2 Quote Link to comment Share on other sites More sharing options...
GenTLe Posted November 22, 2015 Author Report Share Posted November 22, 2015 Thanks. Looks solid!I have one coming in. Hopefully I will get it before the holidays. Will service it upon arrival and will do a review if it hasn't been done yet on other fora? Hi Mate,haven't seen a teardown or any service-related thread on any of the 3 fora I follow (basically RG, RGW and here).It would be GREAT if you may do some picture thread with the teardown and with some suggestion like "take care of this because it can fly away easily" or such. 1 Quote Link to comment Share on other sites More sharing options...
mule play Posted November 23, 2015 Report Share Posted November 23, 2015 Nice. Thank you for the analysis. Quote Link to comment Share on other sites More sharing options...
SSTEEL Posted November 23, 2015 Report Share Posted November 23, 2015 Look forward to the review M. Quote Link to comment Share on other sites More sharing options...
coolfire Posted November 23, 2015 Report Share Posted November 23, 2015 Thanks. Looks solid!I have one coming in. Hopefully I will get it before the holidays. Will service it upon arrival and will do a review if it hasn't been done yet on other fora? Can't wait as I'm considering one too, M. Sent from my SM-N910G using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.