Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Opinions on 2nd new Vintage Rolex Maker (5513, 1680, 1665)


slay

Recommended Posts

I'm sure many of you are familiar with the Cartel maker (aka JKF) who released a load of decent Vintage Rolex recently. I saw on Ryans site that he now offers a second "Best" version that appears to be from a different maker. I don't know in what way it should be better, it's just called "best", so I'm going to keep referring to it as "best" to distinct it from the JKF/Cartel edition. 

I personally prefer the "best" version's insert. Crown guards appear to be bigger, which isn't a bad thing if you're a modder. I personally don't care about the dials, since I would never wear either one of these with the stock dial, but I assume there are plenty of others who intend to keep the dials.

Below is a side-by-side between JKF/Cartel (always on the LEFT) and the "best" version (always on the RIGHT). I'd be curious if the 1680 "best" version takes gen dials (the JKF does not without mods! Gen dials are about 0.5mm too big)

Rolex 1680 Red Sub (JKF vs. BEST):

cqTNrqV.jpg
VZ15El8.jpg
MTOmI1M.jpg
cZEGrEq.jpg
lRp9CJR.jpg
KbvxqFc.jpg



Rolex 1665 Double Red SeaDweller (JKF vs. BEST):

Bc7DiOa.jpg
eFp9t9g.jpg
bqUPcTH.jpg
1yv3gH6.jpg
kqA7Dmn.jpg
byuT0Mp.jpg
TpXyYNM.jpg
fo5wydy.jpg




I have not taken a loupe to compare them pixel-by-pixel, but here's what struck my eye.

Better on the new "Best" version:

  • Bezel Insert (Fatter font & already slightly faded color)
  • Bezel Ring (Slimmer, Groves not as deep)


Better on the JKF/Cartel Version:

  • Clasp (rolex coronet is slimmer)
  • Endlinks (they are both wrong, they shouldnt have holes for a springbar tool, but at least the JKF has the correct number -580- on the otherwise wrong endlinks)
  • Like 1
Link to comment
Share on other sites

6 hours ago, dpap said:

Hmmm. Do you think there is enough meat on the best version for a scg?

It might.... 

Drill and try to sink the tube and thus Athaya 700 crown a teenie bit. 

Lengthwise the CGs should do, however creating the almost square shape in a "crown face" - projection might be on the edge. Luckily the crown is a bit flatter than 703/704.

R1064724-1024x677.jpg

  • Like 1
Link to comment
Share on other sites

I don't understand how JKF does parts on one watch correct and disregard completely on e.g. 5513

I would most likely prefer this one because of that.

http://www.intime.co/tudor/2959-vintage-200m-660ft-jkf-best-edition-black-round-handset-round-markers-submariner-a2836.html

Maybe they're continually improving?

Link to comment
Share on other sites

38 minutes ago, RickFlorida said:

Anyone think it would be possible to order just a tudor case back that's engraved or his source never sells parts?

Sead tried several times to get parts for me (I wanted an ETA movement ring for the watch), but he eventually gave up and said he tried all he could but is not getting any.

Link to comment
Share on other sites

3 hours ago, RickFlorida said:

OK thanks.   Can any expert comment if the bracelet is any better?   Or is it the same?  I ask because I read that the Yuki nor cartel bracelet clasps are far from perfect and that there are no good bracelets.   If this is improved it would be good to know.

I will most likely be selling my Tudor bracelet as I'll be doing a custom solid linked Glidelock one for my 7928.

I know Rolojack was quite impressed by it. 

Link to comment
Share on other sites

After looking at the picture of side by side..... My opinion is The bracelet is the same but simply polished more.   So there still is no perfect bracelet rep.   You can see brush finish on left, and much less brush finish on right meaning it has more polished finish.

 

Where can I read/see about glidelock version and how can I make one?   

Link to comment
Share on other sites

10 hours ago, RickFlorida said:

After looking at the picture of side by side..... My opinion is The bracelet is the same but simply polished more.   So there still is no perfect bracelet rep.   You can see brush finish on left, and much less brush finish on right meaning it has more polished finish.

 

Where can I read/see about glidelock version and how can I make one?   

all the 93150 rep bracelets stink. the cartel one is still probably the "best"

Link to comment
Share on other sites

12 hours ago, RickFlorida said:

After looking at the picture of side by side..... My opinion is The bracelet is the same but simply polished more.   So there still is no perfect bracelet rep.   You can see brush finish on left, and much less brush finish on right meaning it has more polished finish.

 

Where can I read/see about glidelock version and how can I make one?   

Check my PCG build 5512 that Rolojack finished. 

 

 

Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up