Ikkk Posted June 30, 2017 Report Share Posted June 30, 2017 I'm trying to make my own watch, and designing my watch refer to DJ 36mmI searched and found that DJ uses 29.5mm crystal, 2mm tall and ID 29.5 OD 30.5 gasket. Also the bezel is 2.3mm tall, ID 30.5 OD 34.7..So the bezel grap the crystal and case body with gasket.Now the problem is, I can't find any information of the height of joint between bezel and the case body.I found that crystal isn't completely inserted to the bezel, it comes out like 0.7~1mm.So I figure out that joint between casebody and bezel height is about 1~1.3mm, is it right?(Bezel height 2.3mm minus crystal 1mm equal 1.3mm)Is there anyone can measure the joint's height? Pls.. It's last step for design my watch..! Quote Link to comment Share on other sites More sharing options...
mymanmatt Posted July 1, 2017 Report Share Posted July 1, 2017 I don't know what you're saying. The bezel is 2.33mm and the crystal gasket is 2.5mm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.