Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Building and mod vintage Daytona, AGAIN!!


calvin951121

Recommended Posts

 

Merry Christmas all the members! Since the old tutorial of modding Daytona photos are broken because of expensive photobuckets, I am going to make a new post!

 

Pick out the movement and take off the dial and the first plate with 3 x tiny screw.

b9699cadd1a1a0623652fc14fce44be9.jpg

 

And you can see the 6@ position is stick on the plate!

4453d9ab8e54e1c8cfa401b38f941aa8.jpg

 

Why? Because SN Factory did the “frozen” work for st19 already. Take out the wheels, you can see there is glue... stick on the plate.

51fab0c807286adb2e53e5742f4c3911.jpg

 

Remove it and turn it over, shave the pivot. Sorry forgot to take photos. This is viet dial on unmod position; you can see the original pin is under the had hole.

15ca7425fbd44c2a22b28d7d2e8b9630.jpg

 

Next step, enlarge it! , put it back to confirm the hole is enough large.

894baca49365454d82b220599d2a8fdd.jpg

 

Put on a tiny bit of glue and put the pin and the plate and dial. Make sure the wheel is sit centre!

ee86daf0adc302796bb9c4ae78d7fcc9.jpg

bc6c230f9bcf7acf230ba632db30e1e9.jpg

 

Double check and take out the dial. Not with the plate. Ensure is the correct position and screw that 3 screw back in the movement.

And that’s it!

I finished the mod in 5 minutes.

Hope you all have a nice holiday.

 

 

 

Sent from my iPhone using Tapatalk Pro

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up