jdkno Posted January 18, 2019 Report Share Posted January 18, 2019 After a collection of mostly Omega, Breitling, and Pam's I finally decided to pick up a Rolex as the dark rhodium dial YM caught my eye. Picked one up M2M and the bracelet is about 1- 2 links too short. Right now I have the quick adjust piece folded out and it's in its outermost of the 3 detents in the clasp. Its wearable but much tighter than I'm used to. It had 4 links on the 6 side and 6 on the 12 side. I moved one from the 12 to the 6 side which marginally helped by keeping the fliplock side from digging in a bit. I am assuming with the taper of the band I need to locate what would be the #5 link on the 6 side, is that correct? It feels as though when I moved the #6 link from the 12 side over to the #5 position on the 6 side that it is ever so slightly wider than the bottom of the #4 link. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.