Timelord Posted January 7, 2021 Report Share Posted January 7, 2021 Greetings, just wanted to clarify to anyone who is replacing a seconds wheel in their eta 2836-2/2834-2 movement that one from a 2824-2 will not work!!!! as it will not accept the seconds hand as the top pivot is shorter. I did not know this even though I should have suspected it as the 2836 is thicker than the 2824 allowing for that extra height. I ordered a generic one on ebay which was advertised for eta 2824-2/2836-2/2834-2 which I thought contained tallest one to suffice for each of these movements. but they are not!!!!! Yesterday evening I replaced the wheel that had recently arrived, in my 2836 but the post of my seconds hand l did not reach it!!!! Just informing you all that you will have problems if you are in this situation. Genuine ones may have been labeled differently, but I could only find generics . Unless you can find a seconds hand with a longer tube, you might get away with this, but that is another problem if they are advertised as such but do not do the job. 1 Quote Link to comment Share on other sites More sharing options...
mymanmatt Posted January 8, 2021 Report Share Posted January 8, 2021 You are correct. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.