Click spring for Seadweller bezel

[richard591]

Good morning everyone. Long time since my last contact, but when nothing is going wrong, I guess we just get on with life.

I have a small problem that I need a bit of help with if anyone can. It's as follows.

Some time ago I bought a Baselworld 2017 Seadweller (ARF version) from Intime. Lovely watch and still going well. However, I noticed the other day there was a little bit of play in the bezel clicks and a few days later that turned into a bi-directional bezel.

Having stripped the bezel off it's the actual click spring which has disintegrated. The click itself is perfect, as are the other 3 springs with their ball/pegs. I therefore need a new click spring.

I've seen a previous post on this where springs and SS balls were available from Amazon, but on checking yesterday they are now not available.

I've also contacted Intime, who have supplied me with quite a few parts before, but they can no longer help, so drew a blank there also.

I stripped out a very old original DSSD I had and recovered the click spring from that, but although it now works again, it's not the right diameter or length. I therefore need just one spring to finish the job properly to it's original spec.

Does anyone have one they can sell me, they used to be sold in packs of 10, or does anyone know where they're available now.

Hope someone can help again, as you always have in the past.

All the best

Richard