Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

My Royal Oak predicament


Recommended Posts

Okay... It's not really a predicament, per se... But I'm at a point right now where I have to make a decision on modding my beloved Royal Oak.

Last night, I removed all 8 of the bezel 'screws' so that I could resecure them to the bezel properly. While they are out... Should I get these guys plated in WG? As they are, I certainly don't mind their gold-ish appearance, and I certainly don't want to muck about their size/fitting with additional plate. More importantly, I definitely don't want to risk losing one of these little buggers- Something that could invariably happen while getting plated (yes... I'm a pessimist by nature).

So... What do the Jumbo owners think? You guys know what the screws look like in person... Should I seize the opportunity and mod? Or simply enjoy the watch? As a mod guy, I'm leaning towards plating. Yet, on the other hand... I'm not too bothered by their original appearance, which at times has the appearance of WG anyways...

Hmmmm... :g:

266204-4484.jpg

266204-4485.jpg

Link to comment
Share on other sites

PS: You're lucky I couldn't get it on my wrist Wednesday, or you wouldn't be having this conversation right now :whistling:

I know :) I'm just glad it didn't fit over that paw of yours :lol: I love this watch... It would be very difficult for me to be without it...

I do think, however that you need to add one to your collection.

Link to comment
Share on other sites

I have the same watch and one of those little screws fell out and is lost :(

I have been trying to get a replacement with zero luck......

If anyone has any ideas I would be very grateful :D

EDIT: How did you remove them? Maybe I could remove one and get a jeweller to make me one?

Link to comment
Share on other sites

I have the same watch and one of those little screws fell out and is lost :(

I have been trying to get a replacement with zero luck......

If anyone has any ideas I would be very grateful :D

EDIT: How did you remove them? Maybe I could remove one and get a jeweller to make me one?

Not sure where one could go about finding an extra... But this is the main reason why I removed mine proactively. Now I can secure them permanently so that I don't run the risk of losing any while out and about.

Giving it some thought... I do have a spare Royal Oak 36mm at home with similar scews. I'll see if I can get one of those loose and compare size. If it's a match, I'll send it to you...

Link to comment
Share on other sites

Not sure where one could go about finding an extra... But this is the main reason why I removed mine proactively. Now I can secure them permanently so that I don't run the risk of losing any while out and about.

Giving it some thought... I do have a spare Royal Oak 36mm at home with similar scews. I'll see if I can get one of those loose and compare size. If it's a match, I'll send it to you...

Wow that would be so cool if you could, thanks very much :D

I have only worn my watch once, because the screw fell out that first day :(

I still can't see how you removed them, what is the trick? :)

Link to comment
Share on other sites

Well... For the Royal Oak Classics, the bezel screws/bolts are WG without rhodium plating. So... In most cases, they have a warm, yellow-ish glow to them. There are supposedly some gens that also have YG bezel screws (confirmed by some collectors), but I have yet to see one.

The Royal Oak Offshores use stainless steel nuts/bolts for a more durable case construction. The appearance of these screws is a bit more cold and clinical...

Link to comment
Share on other sites

I ahte to say this Ubi, but, I think the screws you removed look way too brassy to pass for WG.

I know your quest for your quest for perfection in modding, I'd say get them plated.

Link to comment
Share on other sites

Last night, I removed all 8 of the bezel 'screws' so that I could resecure them to the bezel properly.

Congrats!! :p

I think the successful removing of the "screws" is much harder

than the last mod you did on the bracelet by cutting one fixed link out...

I also did the modding of the bracelet and have to say respect

cause i didnt yet made up my mind on how to remove the screws

without ruining the bezel!!

Your right the gen comes with 14k WG bolt screw and rhodinized finish.

In my opinion you got now 2 ways you can go now:

1. Plating the screws

But i dunno how good it will look concernig "finish" and

if the would fit properly after havin them plated...

Never mind about the brassy look of the screws,

some gens do look very yellow too

Heres a pic of the gen

266306-4468.jpg

You can also see on the pic that the screws do appear more yellow then the

indexes and hands although they were all said to be made of 14 WG rhodinized.

For myself the risk would be too high gettin no good result on the plating method.

2. Buy some WG from a jeweller and let yourself produce some WG screws

of the same dimension and look!

I will definitely go for method Nr. 2 if i will have some more time to deal

with my watch...

I already found me a company in germany thats specialized in industrial screw

production and they told me they can process and finish EVERY material

and it would be (even if you have to buy the WG somewhere else) way

much cheaper than the work of a jeweller!!

BTW i have another new and never used TW best 36mm RO case with

sapphire case back and silver looking screws but forget about it...

The screws of the RO jumbo are a tiny bit bigger and i already thought

about replacing them but i dont think that this will look fine...

P.S. Dont forget to place the screws of your jumbo a little bit deeper

into the bezel when you put them back... look on the gen and youll make

your RO look from 65% up to 90% more accurate!

If you want i can forward you the link of the company located in

germany to make you a estimation on price.

Go for it!!

This rep is worth it...

Superb you got the bezel screws out like this!

Regards

George

Link to comment
Share on other sites

Well... Plating is out! I am unable to find a source that will plate with WG; only rhodium, which will be too silver, methinks. So for now... I'll just leave mine as is- Recessing the screws as much as possible as George suggests.

As for making screws out of WG... I don't know that I have the patience to wait for that. Maybe if I get my hands on another Royal Oak (perhaps white this time), but I miss wearing this one already...

Link to comment
Share on other sites

@ubi

...be a little patient before glueing them back to quick!

So take youre time in resizing the height of the screws

just a tiny bit by grinding them...

Me think the "holes" where the gen screws

sit on the gen also do appear a little bit like

a "sharper cut out octagon" as it is on the rep...

I havent made up my mind about this issue but

maybe someone could try to carefully rasping

the wholes with a triangular file but i think you

have to drill first 8 holes thru the bezel to get

god access with a file though...

Damn it would for sure give the bezel an awesome

look if you manage to fit the screws just a little

bit under the level of the bezel :)

If i manage to get 1 set of the brass screws out

of my 15202 rep and send it to this factory i

definitely will show you the results... i guess

making 16 instead of just 8 screws of solid bezel screws

must not be too much of a difference in price :g:

Ill keep you informed but im very "monopolized"

with work at the time...

The sooner i get my screws out the faster

i can ask the factors on estimated price ;)

Beeing patient is not so much a trouble for

me cause i own all 3 kinds of dial models (white/blue/black)

lol... i have to go for a side by side shooting of

the 3... maybe someone will find out

what color is the most beautiful :)

At the moment i like the white one the

most but i also had the blue and the black one

as a longtime favorite on my wrist...

Cmon Ubi did u use glue-dissolver and a

toothpick besides beeing patient to remove them?? :secret:

Tell us the secret lol

I want to get mine out of the case to have them

duplicated and i cant wait :)

George

Link to comment
Share on other sites

I would get those bad boys plated in WG. I think there were some threads on the old forum about doing this (I had this mod in mind when I was researching AP reps) and I think they said you could buy home kits to do the plating youself. However, it was a long time ago, so I could be wrong...

Link to comment
Share on other sites

You can get plating pens from ofrei's and other on-line dealers. They are basically a mini electro plating setup. They had quite a list of different metals last time I looked. I'm fairly sure White gold was one of them.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up