fivefive Posted January 15, 2008 Report Share Posted January 15, 2008 Hi all, Just wondering which tool to get to adjust noobmariner's bracelet please? Thanks Quote Link to comment Share on other sites More sharing options...
abat Posted January 15, 2008 Report Share Posted January 15, 2008 They're screws, I also had to use a hacksaw on mine but that is a different story. Quote Link to comment Share on other sites More sharing options...
fivefive Posted January 15, 2008 Author Report Share Posted January 15, 2008 screws as in like the one on SOSF?? so all i need is a screw driver?? Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted January 16, 2008 Report Share Posted January 16, 2008 There are two ways to adjust- 1) You can do large adjustment via link removal at the clasp ends. I find that a 1.5mm screwdriver works well here; you don't want too large of a blade and you definitely don't want too small either (worse). 2) You can do micro adjustment at the clasp itself. There are a series of small holes on the side of the clasp in which the last link is connected via a small spring bar. Moving that springbar/link within those holes will net a small fine adjustment to suit a more snug or loose fit. You can use a pointed tool for this operation; I myself use a very basic and barbaric push pin tool for this operation. Best of luck. R Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.