Star69 Posted July 12, 2008 Report Share Posted July 12, 2008 so - finally its done it has now an ETA movement - gen crow fits without mods - same with the gen insert - but the gen crystal - sadly doesnt fit some pics from today ... gen insert fits perfect : gen crystal mounted - notice the perfect magnification : but sadly its like 0.1 mm to small to stay in place - i dont want to glue it in ... here you see the differences - rep vs gen : and the watch so far with the stock crystal : cheers, Frank Link to comment Share on other sites More sharing options...
Tribal Posted July 12, 2008 Report Share Posted July 12, 2008 Frank you need a gen or aftermarket Gasket to fit the Glass. On the other Euromariner all fits fine I can't understand why not on yours. It looks like the gasket is broken and you have now two pieces ? Maybe there are small differences from factory. But hey looks good. Link to comment Share on other sites More sharing options...
Stephane Posted July 12, 2008 Report Share Posted July 12, 2008 Lovely Frank. It's a shame that 1 mm makes such a difference Thanks for sharing with us. Link to comment Share on other sites More sharing options...
gplracer Posted July 12, 2008 Report Share Posted July 12, 2008 Frank the watch looks great! Sorry to hear about the crystal. Maybe someone can post an oem or after market gasket so you can compare the sizes. Congrats on what you have so far! Link to comment Share on other sites More sharing options...
w.genzo Posted July 12, 2008 Report Share Posted July 12, 2008 A gen or aftermarket gasket is slightly larger and taller (compared to wm9 one). I guess it's the same for your MBK. I've just upgraded my watch with a gen gasket and it makes a huge difference, the crystal sits higher and the rehaut becomes deeper, same depht as gen. Try like Tribal says, otherwise it's a pity Link to comment Share on other sites More sharing options...
mrandazzo Posted July 12, 2008 Report Share Posted July 12, 2008 Very nice! It's a shame that doesn't fit The mag from the gen crystal is perfect! Thanks for sharing! Link to comment Share on other sites More sharing options...
Tribal Posted July 12, 2008 Report Share Posted July 12, 2008 here you see the differences - rep vs gen : Could you please Took a picture without gasket from the rep Glass.. BTW the Gasket is too small Looka t the Pics I send you.. Link to comment Share on other sites More sharing options...
Star69 Posted July 12, 2008 Author Report Share Posted July 12, 2008 thanks for the comments ! i think the problem is only the gasket - anybody know where to get a gen one - or has a pic of it ???? but maybe i do something wrong Dirk - there is no gasket on the rep glas - it is so fat . some more pics : this are all the parts of the bezel : this is where i belive - sits the gaket we are talking about the construction is nice exept for the plastic ring that holds the bezel to the case : (at least i think - without it the bezel can not me mounted to the case) i whould love to see the gen assembly or the WM9 one .... cheers, Frank Link to comment Share on other sites More sharing options...
Star69 Posted July 12, 2008 Author Report Share Posted July 12, 2008 okay - found this on ebay : #250254242187 it this the one we are talking about ? thanks ! Frank Link to comment Share on other sites More sharing options...
w.genzo Posted July 12, 2008 Report Share Posted July 12, 2008 NO, this won't fit. You'll need 295c-2 gasket. 295c-1 is for datejust (and daytona I guess) It's not easy to find a gen gasket only, you could buy clark's crystal complete (specifying for submariner), gasket has the same gen specs, and you'll have a spare crystal. Ebay #300230156651 Link to comment Share on other sites More sharing options...
vintagerolex Posted July 12, 2008 Report Share Posted July 12, 2008 NO, this won't fit. You'll need 295c-2 gasket. 295c-1 is for datejust (and daytona I guess) It's not easy to find a gen gasket only, you could buy clark's crystal complete (specifying for submariner), gasket has the same gen specs, and you'll have a spare crystal. Ebay #300230156651 Do you know if this will fit the noobmariner? Thanks. Link to comment Share on other sites More sharing options...
w.genzo Posted July 12, 2008 Report Share Posted July 12, 2008 Do you know if this will fit the noobmariner? Thanks. Definetely no, they won't fit Link to comment Share on other sites More sharing options...
vintagerolex Posted July 12, 2008 Report Share Posted July 12, 2008 Definetely no, they won't fit I want to upgrade the crystals in several of my rolexes, do you know if replacement crystals are available that will fit the other rep cases, datejust etc? Is there a reference giving the dimentions of the genuine or oem rolex crystals? Thanks. Link to comment Share on other sites More sharing options...
Stephane Posted July 12, 2008 Report Share Posted July 12, 2008 Ok me too I want to upgrade my WM9 and my Noob "16800". 1) I'd love to fit a genuine crystal (with laser edged crown) on the WM9 but apparently it's are hard to find so if someone can help me to find one or sel me one ... 2) Genuine will not fit the Noob case but does anybody know which Clark, if any, and with NO laser edged crown, could be fitted in a Noob case ? Many thanks Stephane PS: I want the crystal of my WM9 Tribalised to look like this Link to comment Share on other sites More sharing options...
GSmaniac Posted July 14, 2008 Report Share Posted July 14, 2008 well done Landsmann :-) how about the Datemag-Position on your Repcrystal ? On mine Euromariner LV the Datemag is a mm too far left an a bit underline. Yours better? Maybe you sell it? Regardz from Doenertown GSmaniac Link to comment Share on other sites More sharing options...
Star69 Posted July 14, 2008 Author Report Share Posted July 14, 2008 Doenertown ?? what's that ? Berlin ? Koeln ? my cyclo looks like that (also not perfect ... ) with gen crystal : when - i have my clarks gasket and it fits - sure i don't need the rep crystal any more. but its a nice watch cheers, Frank Link to comment Share on other sites More sharing options...
GSmaniac Posted July 14, 2008 Report Share Posted July 14, 2008 its fuXXin`capital city :-) maybe i should find talented modder in germany to replace my datemag :-( im a classical destroyer if i try it.... any solutions are welcome Regardz GSmaniac Link to comment Share on other sites More sharing options...
fakemaster Posted July 15, 2008 Report Share Posted July 15, 2008 Keep it up. I love seeing people do their own stuff. Is it not fun or what? Link to comment Share on other sites More sharing options...
Star69 Posted July 15, 2008 Author Report Share Posted July 15, 2008 if anybody is interested - i found the gen construction : looks spot on with the Rep - i hope my Clarks gasket will work out - it needs to be a little thicker then the rep one i have - then it should work out. cheers, Frank Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted July 15, 2008 Report Share Posted July 15, 2008 Doenertown ?? what's that ? Berlin ? Koeln ? my cyclo looks like that (also not perfect ... ) with gen crystal : when - i have my clarks gasket and it fits - sure i don't need the rep crystal any more. but its a nice watch cheers, Frank did the gen crystal reduce the mag size or is this an illusion? Link to comment Share on other sites More sharing options...
capice Posted July 15, 2008 Report Share Posted July 15, 2008 wow well done Frank(and I don't even like Rolex.. Link to comment Share on other sites More sharing options...
lazarini Posted July 15, 2008 Report Share Posted July 15, 2008 Im so keeping my fingers crossed the gasked will work out for u my friend! but still if it don't u have a one hell of a watch ... regards laz Link to comment Share on other sites More sharing options...
Tribal Posted July 15, 2008 Report Share Posted July 15, 2008 Hey Frank, your gasket is broken what I see from the Pics. The small gasket in the retaining Ring a the bigger plastic ring are normally one piece. Maybe you broke it by dissambling. So no plastic Ring that hold the Bezel and an extra gasket for the Crystal just one gasket. Hope you understand what I mean. Link to comment Share on other sites More sharing options...
Star69 Posted July 15, 2008 Author Report Share Posted July 15, 2008 Hey Frank, your gasket is broken what I see from the Pics. The small gasket in the retaining Ring a the bigger plastic ring are normally one piece. Maybe you broke it by dissambling. So no plastic Ring that hold the Bezel and an extra gasket for the Crystal just one gasket. Hope you understand what I mean. yes - amazing how this Rep has exactly the same construction like the gen - hopefully i have my new gasket soon Link to comment Share on other sites More sharing options...
lazarini Posted July 17, 2008 Report Share Posted July 17, 2008 not to nose in here but i wondered what happened any update on this my friend. Laz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now