cheddah

Yes after running the chrono for a couple of hours if i push the top button it stops and the second hand @ 9 keep running.

After stopping the chrono, when i push the bottom button it doesnt do a thing.

Let me get this straight...after you have run the chrono (aka stopwatch) for a few hours for example, you press the top botton again, and the chrono stops...but the secs @ 6 keeps running, correct?

You say, when the chrono is stopped after it has been running for awhile, after the hands are all over the place from the chrono running, pressing the bottom button DOES NOT bring the centre second hand, the hand at the 12-o-clock subdial, and the hand at the 6-o-clock subdial back to the top (aka 12-o-clock position)???

If that is the case, then you likely have a defective one.

Word of warning...you will not get a new one from Josh/Andrew until you ship the old one back to him. You will need to send it back by airmail (should cost $15-20...any more than that, and you might have too small a package and are getting charged a premium for an undersized package). Don't send it back by courier. Listen to the instructions of Josh/Andrew.

You will have to pay the shipping back...he will pay shipping after the watch is FIXED. You will likely NOT get a new watch...but a fixed one.

That's how it goes in the rep game. A return process generally takes about 2 months before you will get a watch back in your hand. Good luck.

I noticed the problem after wearing it for a full day.

please not that the subdial at 6:00 is an hour marker and moves very slowly. for example, it takes two hours to reach the 2. make sure that you let the chronos run for at least an hour. if you were just running it for a minute or two and then tried to reset them, you may not notice it resetting as it really hasn't moved yet. kind of confising but just let the chronos run for an hour and then try again. if the 6:00 subdial doesn't move then, you have a defective watch. good luck!

Yup i get what youre saying, but even when the chrono is stopped the bottom button doesnt do anything. I think i received a defected one. Ok so i asked Josh to send me a new one with a postage so i return the old one. I'm waiting for his email...

The subdial @ 9-o-clock is the running seconds...that's the one that continually runs...always (well, except when there's no juice left in the power reserve). The top button should start the big centre seconds hand which is your chrono hand...aka the stopwatch hand. Press the top again, and it should stop the centre seconds chrono hand...while the 9-o-clock keeps running...always. The bottom hand should bring the centre, 12-o-clock and 6-o-clock hands back to centre, resetting the chrono.

The top button starts at stops the second hand, not the chrono. The chrono second doesn't stop at all.

Top button starts the chrono. When started, the bottom button does nothing. Press the top button again and it stops the chrono. Bottom button should then reset the chrono.

Hi guys, i received my Skyland Avenger, first off i want to say its a beautiful watch. Now i know the top button is suppose to act as a start/stop for the second hand. But isnt the bottom button suppose to do something to? Regardless if the second hand is moving or stopped the bottom buttons doesnt seem to do anything. Is this how its suppose to be?

yeah cheaper then $140 would help if possible. I bought the watch for $180, if i have to pay $140 i rather buy a new one

I wish I could give you a source for a cheap Asian 2836-2. Maybe someone else knows where to get them??

Ok i found out its the Asia Eta 2836-2. Where can i buy just the movement?

It was probably purchased from Josh at Perfect Clones: hxxp://www.joshwatch.com/

I think the first thing to do is to figure out which movement is inside. If you can't figure it out from the Perfect Clones website, maybe you can post pictures of the movement.

Nope i dont, i know it was originally purchased from a guy names Josh.

Hey guys, i purchased a BR 01-92 off another member and after owning it for about 3 months i must have done something wrong because it stopped working. Anyone know where i can buy just the rep movement? Not looking to spend a ton of money, just want it working like normal.

Thanks in advance,

Robert

Hey guys, i purchased a BR 01-92 off another member and after owning it for about 3 months i must have done something wrong because it stopped working. Anyone know where i can buy just the rep movement? Not looking to spend a ton of money, just want it working like normal.

Thanks in advance,

Robert

what is or where is RWI? Can you please provide a link? thanks in advance.