Thanks.
I opened the watch, and it turned out the pusher had broke off "outside" the case, so there was no loose screw or C clip.
But it was two other small metal pieces lying around in the watch
So I glued the pusher back in. Hope it stays.
I have an IWC slevin where the top pusher fell off and the little spring inside fell to oblivion. I have tried to push the pusher back in, but it is very loose and is likely to fall off during normal use. Is there a good way of fixing this. The chrono is non-working anyway, because a missing transmission between the pusher and the movement.
Any help is appresiated.
Thanks.
+1
And that includes racially charged words as well. The more people focus on what you can or can't say only contributes to promote racism.
By the way, I'm Norwegian. When I was young it was perfectly ok to say "Negro". Apparently that is not ok to say anymore. What about Negress?
Atleast in norwegian, negress is a positively charge word, witch depict a beautiful black woman.
Yes, I think it is a tension-ring to keep the movement in place.
I have the same on my slevin, just be very careful when putting it back together. There isn't much clearance for the rotor, so you must be precise.
Wow.
If you really don't understand what you are communicating through your posts, I feel sorry for you Robbie.
Hopefully you are as serious as this web site. and have a good time pissing people off.
Cause if you are for real and truly mean what you say, then you're portraying as a self centered brat with lack of respect towards other people.
If that is the case I suggest you rather post this [censored] over at TZ and leave us alone.