436NR

I was trying to adjust the daily timing of my A7750 and instead of moving the lever with the 2 gold dots I moved the one with the single gold dot. I further researched that the lever with the single gold dot controls the the isochronism of the watch. The article that I read said NEVER touch that lever and if you do you need to go to a watchmaker to get it recalibrated. I put it back to where I think it was. I made a mental note of it's position before I moved it just in case. Not sure it's the EXACT spot but we're talking fractions here. What should I do? Is there anything that I can do to calibrate on my own -OR- am I basically screwed?

I have to tell you guys that the search button is the best thing going. Toad: your guide is the best! I'm not new to forums in general so I know enough to search first... ALWAYS! Every guide I have read stresses using the search function and trying different strings. To all the noob's out there that have doubts, here's a real world situation that occurred to me... hmmm.... today! I took my new rep that I have had for a week and decided to wash it with warm water and mild soap to make it nice and shiny (in the sink). That was two days ago. This morning was a foggy, misty day at the Jersey shore. While walking on the dock to catch my ferry I looked down at my watch to see what time it was and much to my shock all I saw was fog! My watch fogged up from the inside! My first reaction was panic. My next was to crack the laptop open and post a plea for help on this forum. I instead waited for my 40 min ride to finish and get in and hit the search button here. Not only did I find my answers as to why, but also what to do about it. I knew I wasn't the first DOPE to do this! And when I hit the "how do I take the caseback off" question without damaging the watch, I found that too. So, in less than 30 min I had all my answers, watch bracelet off, caseback off and drying on a heat source. And guess what? No more fog! I did it all without crying for help and getting spanked my the greats that dwell this place. So YES, always SEARCH first!!! It works!

I got lucky! I ordered my first rep before finding this most AWESOME place. I googled "Breitling Replicas" and looked at all the dealers out there. I eliminated the ones that all used the same stock photos. I luckily found one that did a great job and supplied an excellent watch. I was a bit stressed after finding that no one here ever heard of them and they were not on the list. I must admit, it was all gut! Real lucky!!!

Thanks! I have to tell you guys that I've been treating the rep with kid's gloves especially after learning about the sensitivity of the Asian 7750. The gens are built to take a pounding and still keep their aesthetics and accuracy. I'm a former mil aviator and know how to use a flight computer. But despite the Nav wheels on the gens being accurate they are not practical or even usable in flight. It's just a badge that id's you as a pilot. I use mine now while cruising on the boat for planning purposes. The reps are just not reliable as a professional instrument. All they do is make you look like you have a few $$$. This watch looks great and actually holds time well. That's all that 99.99% of us really need from it.

I'm fairly certain that all the Datoras have sunken dials with concentric rings. When you look at the Havana gen dial it doesn't look like it, but when you look real close it does.

Well, I've had this watch for a week now and I gotta tell you it's running pretty well. I hacked it on Monday to the atomic clock and it's only running about 15 sec slow. No real issues. However, I did notice that the lumes are not as bright as the gen. I'm going to have to take a closer look at the gen. The squares are white and it may just look like they filled the squares. The White face has black squares. That may make the dot stand out. I'll take a look with an eye loop.

Thanks gang! Glad to do it! Yeah, the AR really needs to be better. They gave it a light AR on one side. The Gen has a double AR. I love the double AR that Breitling does on the gen. The markers on the nav wheel start to deviate at 11 and are a half a mark off from that point. I forgot to mention that although the bezel rotates smoothly it is easier to rotate than the gen. the gen has much more resistance so that when you align the markers when doing calculations they stay put. I purchased this one from replica-time.com. It appears they get their reps from the same place that perfect clones (Joshua) gets theirs. They have the same descriptions and same selections. Shipping is included in the price so the prices are a bit more.

As promised I said I would post a review. I have a gen Datora with Havana dial, so I used that one as a benchmark for this rep. I have to say that this rep is beautiful! But like all reps its still a rep. There are some subtle differences that you really have to look hard to see. The first and biggest thing is the AR. When they said "light AR", they really meant it! I also noticed that the day and month font are bolder on the gen than on the rep. You'll also notice on the Nav wheel that the markers do not go all the way the edge as in the gen. The next difference I found was in the case itself. The Gen as two steps down towards the case back on the side. The second step has a concave slope to is versus square steps on the rep. The weight feels the same as the gen however you can actually hear the rotor and see the watch wobble on the wrist when its spinning around. Alll in all, the craftmanship is impressive and I really would not have known it was a rep if I didn't know better. It is a beautiful watch! Feels good on the wrist and the white?silver color is good. I'm very happy with this Datora. I sync'd the rep with the gen and after 24 hours the rep is running 30 sec faster. Not bad! Below are some more picks. Enjoy! Well, that was my first attempt at a review.

Ok! I just got my rep Datora today! Very nice looking. Since I already have a Gen Datora I'll make a comparison and post a review with pics when I get a chance in the next day or two. I can tell you that the white dial is NOT cream colored. Its more silvery white.

Ah..... that's a little creepy Dude!

Thanks for the info. That's what I was looking to do, put one in my hands and take a good look at it. Thanks again!

So there are good reps there? Most of the shops said "no Breitling". One guy was wearing a Navitimer and looked at me like I was nuts!

Thanks andreww! Yes it is! Curious, what's the complicated part? The 6:00 date with the 3:00 & 9:00 subs?

Any good Skyracers out there? I saw a gen and it really appealed to me. Thanks!

I have a gen croco and I like it. Feels comfy to me. I ordered a rep croco from PureTime for the rep I have inbound. I'll let you know my thoughts on that one when it comes it.

I took a long lunch and went up to Canal Street. Ugh! What a disappointment! I found only two shops that went in back and got the good stuff and even those were real crappy reps. Guess I'll stick to RWG and everyone's recommendations here. You all seem like a good group! I hope to get to know some of you.

Yeah! I see now as well. I compared your pics to my gen and the sliderule markers don't go all the way down to the edge. Most peeps wouldn't notice. I didn't notice when I looked at the pics on the net. It's only after you mentioned it. Still a sharp looking watch! I don't want to wear my gen on a daily basis so this rep will do fine. I have to maintain my image! I just can't get anymore gens right now in this economy! Its a sickness.... I needs more watches! Hopefully this will hold me over until I can start spending $$$ again.

I totally understand. Thanks!

I'm chasing one of these. The ones on the net all are of the same sample photo. No warm fuzzies there! Anyone know where I can find an excellent rep of one of those? Thanks!

Anybody have any experience with replica-time.com? This is the one that I ordered.

I did a search the other day and there is a review but it points to the old forum and it wouldn't let me see anything there. Thanks! joint05: I got the confirmation that it shipped. I'll let you know the details when I get it. I'll post a few pics.

So the 7750 Valjoux Working Chronograph movement is actually Asian?

I just ordered one. I have a Gen with Havana dial. I ordered a rep with the white dial. I'll let you know when I get it. The pics from the site where the best I have seen from all the sites. Although, I did see that the sub-dials had circular grooves. I don't think the white gen does. I'm pretty sure that this one has the Swiss 7750.