shkolnik
-
Posts
73 -
Joined
-
Last visited
Posts posted by shkolnik
-
-
-
-
-
very nice !
-
-
really good! where did you get the paper?
-
-
-
-
-
That Is a beautiful SA, you did a fantastic job, congratz Mike
Thanks
-
Congratulations! Any wrist shots? How did you exactly get the rep bezel off? Any tips?
I not so well know language.......... But I will try to explain.......... Not to scratch the case, I at first have inserted between bazel and the case the ground credit card, have then hooked a knife......... bezel has jumped out together with glass......... It would be necessary to cover watch that the dust has not got and to continue work....... It is necessary to insert a thin screw-driver from below between bazel and that part of the case which holds glass, thus it is possible to remove bazel........ It is necessary to put into place a part with glass, very precisely!!! Points should correspond to 12 and 6 hours and strongly strongly to press, I would do it with a rag what not to break glass!!! Now gen bazel...... It is necessary to turn out screws....... It is necessary to take out inside a ring and to straighten it.......... Then to bend to another in the form of small waves....... To curtail into a circle and to put into place........ In such kind it is necessary to try to establish bazel on its place helping a screw-driver, before click (from me took some hours)........ All!!!! It is possible to wrap back screws..... Good luck
-
Very nice. Where did you get the papers for this?
ebay......
-
All greetings, personally I used for the franken SA case from V3 it more precisely to gen, than V2, but caseback and hand set from V2 it is more exact to gen.......rep bezel V3 IS MORE THIN THAN GEN ! Also I managed to replace bazel on gen..... It was a lot of work....... And here that has turned out.....
case and crystal - V3
backcase , hand set and date wheel - V2
dial - gen black batons
bezel - GEN !!!
bracelet - gen PRO 2
strap - gen OR with gen clasp
movement - gen ETA 7750 , +/- 3 sek every day
box set and papers - gen
-
ok ok ok, many thanks friends for your opinion - it for very important!!! From it follows that at me something has turned out interesting and beautiful!!! So....
case & glas - V3
back case - V2 (It is more similar to the gen)
hands set - V2 (It is more similar to the gen)
dial - GEN
bracelet - GEN PRO2
mechanism - gen ETA 7750
data wheel - V3
And at last most important of for what all it began and asked all these questions......
BEZEL - GEN
Yes yes yes, at me it has turned out. After several difficult work hours and the big invention, I managed to replace it. It works as should 1:1!!!
-
Rep. On the gen the hour markers are two pieces, these appear to be one piece with a groove. The steel part of the pearl is also more pronounced on the gen. Nice copy though!
You are not right, now I will tell why.....
-
-
-
-
-
Who does that know, whether it is possible on V3 to replace bazel on gen?
-
thanks for the post, seraphe
@shkolnik: you are saying big diameter again. Precisely?! I told you I measured the bezel which is 39.9mm. Gen insert snaps in. How exactly did you conclude that? Precise eyeballing?
-bk
Strange, whom I do not wish to offend, and itself wished to buy these watch, but bezel sticks out over the case, the case small can? It is evident.....
-
bezel, now I see precisely - it big diameter, than it is necessary
-
Interestingly, and on this version it is possible to replace bazel?
My new hyperfranken Super Avenger
in The Breitling Area
Posted
to spedman - great work! Do not stop - keep going!