t

still all crowns are available

drop me a email to t_crowns@yahoo.de

in the work

ready to order in January 2011

no crown guard -NEVER

because this is a protected design by Panerai and i don

i will no make any more of the yellow gold one... i can not wait another 2 years to get them

these days it is very hard to get parts from the factorys because the SWATCH GROUP bought all this factorys and closed the sale outside of the SWATCH GROUP. Other watch factorys are in the hand of LVHM and Richmond.

bad days for small brands.... take what you can take

the second hand is special made to fit the recessed pin on the Angelus movement

no extra sale of the second hands

the yellow gold model is SOLD OUT. One buyer got all.

The rose gold model is still available

sorry forgot the price

$99 per set

after 2 years delivery time

new custom made hands fitting Angelus 240 - with special long shaft on the small second hand to fitting the recessed second hand on the Angelus 240

rose gold model

yellow gold model

ok

i will produce the non-SL crown again in 1.2mm

not overpolished... same finish like the SL crown

and 0.8mm deep dish???

correct?

any other updated on this crown?

... i have pass this project

i will not produce a new crown with deeper dish and accepting 1.2mm stem

this crown would need a new crown tube and everyone would need to drill a bigger hole in their case to accepting the extra tube...

this woud be to much work and to expensive if a modder would do this...

sorry but the rep case is totaly different from the gen case.... therefore is it not possile to produce a SUPER crown to fit the rep case

anyone have a picture of the movement from the PAM 360???

so we an check if it

which 6497 version is working in the PAM 360???

anyone has a picture????

Maybe you guys should produce a special "RWG" version of this.... limited to 300 pieces (hand selected customers)...

i will supply the 1:1 movement from SOPROD

sale price $1.000 .... second hand value $3.000 (if you can get it )

T how would these go over time when on a 6497 movement being constantly handwound.?

this will be no problem... because you will not wind the crown after the resistant (full power reserve)... but when you install the crown you will screw it in very very strong and here could the crown tube break if you press it like a hell

A stem comes for free to all my crowns... buy a crown and get the stem for free!

So we should just use some Loctite and wind lightly until the first sign of resistance? Good to know.

may you misunderstood... when you install the new crown on the stem... you need to screw it in strong on the stem... or the crown will not fit tight enough on the stem... but please don´t wind the crown tooooooo strong... some guys wind it like hell... but this crowns are very sensetive and the crown tube can break... the crown tube is very thinn (because the spring mechanism need to much room). On the genuine is the crown tube thicker and more stable. Also, the older T48 crowns are more stable because no spring mechanism and more stable crown tube. But the new spring loaded crowns are very sensetive with thinn crown tube... be careful!

When you install your new spring loaded crown... please don

I know the rep guys are more "fussy" as the gen guys... but it is ok. The crown is not cheap so it should be in best condition and every buyer should be happy with it. So if someone is unhappy with their crown please ask me for an refund... but i don

i have check some crowns and all has consistent theets which come to a point... but i need to check some more crowns tomorrow... it is not visible... also not with a 10x magnifier... the picture show the crown with a 30x zoom... i don

still available

it is not possible to make the crown dish deeper because the spring mechanism sitting here

for the guy who using the "OEM, Jimmy, Little Hero, SNembo, Torobravo and old cartel crownguards" will produce a extra crown with 0.8mm dish deep and 1.2mm threaded crown... with a bigger crown tube like the gen

this special crown will be ready in November / December... i will start with the drawings soon and will contact you guys

the pre-orders are all shipped today

new orders will be shipped out within 48 hours

here pictures of the SS and TI crowns

the SS crown is now finalized without the over-polishing and without the slope

tomorrow will have ready in stock

200 x SS crowns

100 x TI crowns

50 x special stems

all crowns (pre-orders) will be shipped out by end of this week

all new orders will be shipped out by next week... place your order

better pictures.. in compare with the SL T48 SS (sample crown with the overpolished bevels - the mass production will be with less polishing) and the older T48 SS + T48 TI...

i have check some genuine TI watches and they aren

I have the Titanium crowns in stock... but they aren´t beadblasted... and if i am correct the TI crowns should be beadblasted... isn´t??? The old T48 crowns was beadblasted... i am not a expert... could someone tell me how the gen TI crown looks like? Is this new Titanium crown good or do we need it in beadblasted finish?

here pictures of my crowns

left: old T48 titanium crown (beadblasted)

middle: new SL T48 titanium crown (without beadblasting)

right: old T48 steel crown

The shipping of the SL T48 crowns will start by next week. The Titanium crowns will be shipped out in 8 weeks. Also is a PVD crown in the work and will be available in 6 weeks. I