Ahky

Dear Members.

Your guidance is much appreciated on the best Rep for a Luminor Marina Base model. I have seen threads on the H and Noob differences, but was wondering if there are any other considerations. I'm looking for the best rep money can buy for this model. Thanks in advance.

Will try over the weekend. thanks.

Got this today. Wanted to share the good news. It look absolutely stunning...AND the case edges are polished as with the the gen..so no additional work neccessary.

Very very nice.

One question. Can you please tell me if the pushers came with the package or if you bought them seperately? They seem to be spot on to the Gen.

thanks.

As always thank you for the great advice and guidance.

all the best.

Dear Members.

Can you offer some advice on how to properly remove the bezel off of a DW 6263 case?

Much appreciate it.

Dear Members.

I have a gen ROO dial (in blue with markers). I'd appreciate your advice in installing it on a ROO @12 sec. Does this procedure require any major modifications to the watch or the dial? or can a my watchmaker just swap (in) the dial?

thanks in advance.

thanks so much freddy.

Ubi.

If you could, can you please advise on the Gen Rolex Crown/Tube part # and/or diameter in MM. There seems to be a lot of 7mm crowns, but it does not indicate that it is for a 6263 model.

thanks much again.

Thank you so much for your advice and kind offer. For the gen crown/tube should I just look on ebay or do any of the other dealer carry it (e.g. Yuki, Jewelryandwatch, NTD)?

All the best and thank you again.

Dear Members,

I unscrewed the crown from the DW case (as if I were to set the time) I noticed that there is no spring action in the crown. Not sure if I'm clear but I expected that a spring would pop the crown out to a postion where I could then pull out the stem to position to set the time.

Does'nt the gen have the spring loaded crown? If so where would I get one?

best and thanks for your advice.

Me too. I have the gen blue dail. Any thoughts on where to source the correct tachy ring? Thanks again.

Thanks again for the guidance. I appreciate it very much.

Thank you all for the guidance. Do I afix the pushers with loctite prior to V72 movement installed on the case?

Thanks again.

Thank you both for the advice. I checked and the pushers come off the case when I unscrew them.

How do I resove this? Not sure what lockite is. Thanks again.

Thank you both for the advice. I checked and the pushers come off the case when I unscrew them.

How do I resove this? Not sure what lockite is. Thanks again.

Dear Members.

I would truly appreciate your help in verifying the pushers in this new DW 6263 case that I recently purchased. What I would like to know is if these pushers are 1:1 to gen or are they a bit too thin?

After reading many posts on the forum I have found that the closest is the Ofrei. Your kind advice and input is much appreciated.

Special thanks to Freddy333.

thank again.

I know if a place. send me PM. Will let u know.

For some reason my PM is not working. Can you send me a PM?

thanks again for your response.

Thanks much for the guidance. Sent you a PM.

best,

Dear Members.

I know that this topic has been discussed before, please forgive the inquiry.

Nonetheless, I wanted to get your experience/opinion on which source you'd consider to have the better quality 6263 case, hands, etc.

I recently purchased a gen 6263 dial, gen bezel and gen Tropic 21 crystal and want to put together the perfect project. Thank you in advance.

Can u please PM me with condition and price. I might take it off your hands. Thanks much.

Thank you to all dear members for your guidance.

Dear Members,

Your help is much appreciated in sourcing a gen or rep tachy ring for this model. Thanks in advance.

....planning a purchase from him and wanted to check. Thanks.