4000ft
-
Posts
29 -
Joined
-
Last visited
Posts posted by 4000ft
-
-
'SWISS MADE' needs to be just a bit smaller/thinner I think... But this looks very good thus far!
Thought the same but there appears to be a little variation in the gens
Big SWISS MADE (S appears to line up with 32.5 seconds), small bezel dots
Small SWISS MADE (S lines up between 31 to 31.25 seconds) , bigger bezel dots
Rep is like the first one in both respects
-
Other gen pics show engraving having a font like the rep, the gen shown here is the odd duck
Something else I noticed while looking at pics, different shape on the edge where strap meets case, rep bevelled and gen rounded
-
Judging from the rehaut engraving font, this case is highly likely to be a wm9 v3 or a copy of it. This font, flattened Times Roman or whatever it's called, is first and only seen the wm9 v3 till now which I doubt another factory "happens" to use too 'cause it's a "wrong'er" font as compared to the wm9 v2's font or the TW sub's font.
I emailed WM9 about the font a few months before the disappearance, their response:
The font on our M serial Submariner 16610LV is correct. You can check
it out at your Rolex dealer in person.
Sometimes Rolex post fake pictures online in order to avoid counterfeit efforts.
Direct quote... buttheads
-
And the serial between the lugs is M832118
-
Just received mine today, the rehaut looks great, crownguards/crown have exactly the same problems you can see here
http://www.petemilla...rolex/rolex.htm
Serrated part of the crown is too tall (which makes the CGs look too short) and the crown guards close too much at the top, with a gen crown and proper trimming i think it would look very good.
Lume is a little messy when looked at in good lighting and the pearl sucks ass, bracelet and clasp are stamped 93250, and the crystal is cut wrong but IMO it's a much better base to build something nice than the SSD ever was.
-
-
309, the brass ring shows too much on the reps and spoils everything . 349 is similar with cali dial very nice but havnt seen a good rep of that either
too slow
-
Lighting + Photoshop, it looks like they applied lower brightness and higher contrast to the dial in a pretty messy fashion with a brush, look at the edges of the case where it touches the dial
-
Do you just lift the bezel off the the case front?
Is it harder than removing a bezel from a non H-factory case?
Should I remove the crystal first?
Thanks
I dont have a H-factory case but the construction looks like a (mini) Fiddy case, for those I've removed the movement/dial, used a medicine bottle having the same size as the dial, placed the case on top of it and holding the sides of the case just whack the whole lot on the counter
-
Is he still selling them?
They sold out a week ago
-
Interesting to note, on the M series of new PAMs, quite a number are coming with Pre-V handsets.
Every 000/005 M i've seen on the bay has them, and a few K and L's too but maybe they got them at the service center
-
BTW, was this confirmed NOOB or is it Hublot?
The rumours were it was going to be hublot and the lugs, crown to case distance, superluminova and crystal confirm that
-
Is this ok???
25 usd
Looks ok for a car antenna but not prev screwbars
-
1. Valerian
2. petem (2 crystals)
3. BigE
4. Chudd
5. Paulw
6. Repwatch
7. Bosk
8. Nakortheblue
9. Rickhic
10. Z3k0 (2 crystals)
11. panerisiti(2)
12. jcrry (2 or 3 crystals)
13. Pabler
14. Lanikai (2 or more crystals)
15. Sidedish
16. cbd21(2)
17. Slan93
18. Cchrono
19. Deniz21
20. Bynico92
21. Ewing
22. Kioske
23. Jimmynugent
24. Fishgodeep(2 crystals)
25. Suzuki
26. Cdigi
27. Mann
28. Colorao
29. Fitipaldi
30. opcrown
31. btocamelo
32. PrDubis
33. Yousif1980
34. Psycho
35. Rytox
36. Maars
37. burrppp
38. 4fun
39. goin6633
40. Maxman
41. Tallah
42. Whacky
43. Notsobreit
44. EMM
45.ironpumper
46. lasync
47. j4jure
48. Bigmarcelo
49. malfa
50. r_squared (2 x crystals)
51. toddy2
52. kuli
53. cskent69
54. 4000ft
-
Looks alot nicer than their ebay pics
-
-
No it's just wokky, hand stack is short, minute dashes are all bold etc, its a nice watch and feels good on the wrist but not a great rep
-
Thanks for the info Dizzy. What about crystal and rehaut?
Crystal and rehaut are disappointing
-
What an article, making it sound so amazing that a shoe from the past resembles a shoe of today, but over that time feet have changed so dramatically
Author didnt need to get all those quotes from todays fashionistas to make it interesting, the preservation qualities of sheep dung were enough, where can I get some?
-
Common knowledge in these parts.
A statement like I replied to requires some kind of head to head comparison of quality, a WM9/BK vs. WM9 shootout, Ive never seen that thread. Im aware of the final touches BK does to the WM9 parts and to some people they have value but it doesn't equal far better QC
havnt heard of a straight from WM9 watch with misaligned datewheel either
There should be a bit more appreciation of the guy who buys the genuine, tears it apart and produces all the parts... WM9
Oh and original poster... chill out
-
considering BK has a far better CQ.
Source for that?
JLC Master Compressor (Noob Release)
in Other Brands Area
Posted · Edited by 4000ft
Meant 32 to 32.25....