wne

@sputim

so both would be  correct for the no rehaut version right? Thank you!

So I just checked chrono24 Daytonas.
Every 116520 from 2005 until 2007  doesnt have Rehaut and 98% all Fat Hands.

I guess its the right combination then!

Could be possible. But you cant see it with bracelet. So not really worth for me

Case, Retainer should be the same everything? Just the ceramic insert/bezel etc

Hello guys,

I'm still very unsure about the correct GEN Hands for a 116520 without Rehaut. (Will remove it because it looks ugly on the Noob).
Which Hands do I need - the thick or thin ones for a no rehaut daytona?

I read already that Rolex introduced the rehaut in 2007.. but thick hands was already assembled before like 2004?

Im really unsure as you can see.

Maybe someone who is into daytonas can help me!

Thank you

Hey guys,

Short question:

Noob 116500 and 116520 is the same case? Just Ceramic/Steel Bezel and other Dial/Hands? (Both 904L, 4130 Superclone)
But the case is the same. Maybe someone can confirm?

Would like to change a Stock Noob116500 to a 116520 Franken.

Thanks :))

Hey guys,

Domi and me installed today the GEN Tube+GEN Crown on a JF 16610LN.
We got some problems, since we need to modify the case to accept the GEN Tube.

It went all without problems, but the Crown has now a little Gap between Case and Crown..
On the Rep Tube you dont have this Gap since the  crown is very very close to the case. You know what I mean?

Now I'm unsure which looks more "GEN-Like".. with GEN Tube or with Rep Tube:

GEN Tube + GEN Crown:
Imgur: Gen Tube+Gen Crown

Rep Tube + Rep Crown:
Imgur: Rep Tube+Rep Crown

What do you think?

Thank you very much for your comment!

The V7X is a very good "Out-of-the-Box" Watch - thats true, maybe the best you can get still with the KH Dial.

But for your Points:

- I will add an whole GEN Bezel (Bezel, Insert)

So its not necessary for me. I dont want to mod so much on the TC so I better sell it.  A JF case is better for my project, since Im gonna  change 90% of everything to GEN.

If anyone want it - I will sell it in the next days - coming with a GEN Insert.

Hey guys,

Maybe someone can help me.

Im going to start a full Franken 16610LV project so with GEN Dial, Hands, Crystal, DW, Bezel, Insert, Crown, Tube, Bracelet - everything GEN besides the Case.

I already got a TC V7X (Extreme). A 3135H with GEN parts would be fit then.

But I‘m still unsure between the TC and the newest JF 16610LV V2 which has the better case. Of course both need some Mods I guess..

But I read everywhere different comments on the case. Which one is now better? Because otherwise it would be better to sell the V7X „as it is“ and get a JF.

But as you see I’m super unsure. Hope to get some answers here. It’s just about the Case. Everything else will be changed GEN.

Thanks!

Sure they are!

The website is legit, thanks.

Hi guys,

what do you think about this website? http://www.sneakerahead.cc/

Many guys from the US are ordering there, but i cant find a legit review.. so is it legit or not? they dont offer paypal.

Too bad that the hands are incorrect (too much red at the end)..

I get no response from this TC Watches.. so i do not recommend to buy there.

Very very mysterious dealer!

I think gen pics and scam then (they only accept WU)

When comes a super rep from the ice bang II

I dont understand, why they do 4 subdivisions, but other Hublots with 3.

And why no tungsten bezel, why no correct teeths...

Why they cant make a super rep? are they too stupid to get a gen to compare that?

Its not the same watch, yes. 4 Subdivisions!

I ask him for real QCs!

Thank you!

Honestly, I doubt the bezel is tungsten as stated. It looks more like titanium.

I mostly agree with you, this watch is very very close to gen on the wrist. 

If I would micro-pick, I would say that the gen has grey/black lume, and the bezel screws are probably stainless steel instead of titanium.

But these form, in my humble opinion, not more than 3% of the accuracy score. Yes go for this if you like the ice bang 2.

Hi Legend,

thanks for your answer.

I found here the QC Pictures: http://tswatchltd.com/album/?ctl=photos&aid=56

I think the bezel doesnt look good, or is it just the photos?

The other one, are you sure that the DW Font is right? Looks not good to me.

For the other one:

Im sure that a modder can do the right lume on it, but i dont know whats with the screws.. maybe they use mikeys?

--

I did not found another seller for exactly this watch? from the other (big sellers only) sell a crooked one (4 subdials, no tungsten)

So is this a good one?

http://tswatchltd.com/8055-hb2420-hublot-ice-bang-ii-black-dial-cer-tung-ru-asian-7750-28800bph.html

I cant find any flaws against the gen. Also this version has 3 subdivisions and not 4.

What are the other flaws? (only frontside, the backside will no one see)

Thanks!

PS: are there other trusted sellers, who sell exactly this watch above? I found some, but they dont offer tungsten bezel, or with 3 subdivisions!

ty

So this one: http://www.torobravos2014.com/index.php?route=product/product&path=56_133&product_id=531

Its the 44mm Version!

Is this a very accurate version of the watch?

I read a lot of topics, but no one can tell me which is the best version.

what are the major flaws on this? or its 1:1, only the movement is the tell?

Hope you Guys can answer me

Normally i only buy watches with gen parts, but for this, its nearly impossible to find gen dial or gen hands etc..
So I hope you guys can answer me

Hello community,

I search a good Hublot Big Bang, which is near to the GEN. I've seen that, the Hublot Rep's are still good in their quality, very close to to gen.

I already looked at trustys shop, but i have few questions. 

- How good is the quality of Hublot BBs Reps ? (In their "best-editions")

- What about the weight? Like gen? 

- What about GEN Parts? I already read that i can change the parts (like Rolex Sub's). But is this really possible? Are there some Stores to search the Parts? 

Because i want to buy a GEN Dial, but only then, if the rep is sooo bad.

- Do I have to change some parts, or looks it really like Gen? At which parts you can see the Rep?

I already find this HBB's, what do you think?

- http://www.ttw888.com/index.php?main_page=product_info&cPath=279_381&products_id=8682 (Favorite 2.)

- http://www.ttw888.com/index.php?main_page=product_info&cPath=279_381&products_id=10936

- http://www.ttw888.com/index.php?main_page=product_info&cPath=279_381&products_id=7766 (Favorite 1.)

- http://www.ttw888.com/index.php?main_page=product_info&cPath=279_381&products_id=9037

- http://www.ttw888.com/index.php?main_page=product_info&cPath=279_381&products_id=8344

Thanks for your answers, and every help!

And sorry for my bad english.

Hi,

- sorry for my bad english at first -

Im looking for a Gen 116610 Dial for my Sub, but i dont find any. Not on ofrei - cousinsuk - eBay, nothing!

Do you know someone, that can get a Dial for my Watch / or i can buy it regular Online?

Thanks for the Answers!