whereisbrothersterling

Hey gents I have learned in the general discussion area that I need a Tudor Snowflake dial to fit movement 2783 and that the dial yuki offers will not work.

Does anyone know where I might be able to buy a dial for 2783 to fit in my gen 94110?

Or does anyone have a dial that the feet can be moved?

Any help will be greatly appreciated. This may sound like a Want to Buy ad but I think this information will prove valuable to future users to have in the Rolex area.

Thank you all so much for saving my butt on buying the wrong dial.

I was hoping it would be as easy as ordering a Yuki Dial but this is part of the fun I guess.
 

Is there anyway to move this to the Rolex Forum?

This is what the yuki site says.

Rolex Tudor Submariner Dial Parts for date 9411 white lume aftermarket dial for cal 2824 / 2836 / 2892

This Tudor black submariner dial will only fit on Tudor ETA movement 2824 / 2836 / 2892  have date movement Diameter is 26mm, the dial feet at 12 and 42 minutes.

My movement is 2783 not listed above.

Does anyone know if the feet positions are the same for all these movements or if mine if different?

Mine says 94110. Not 9411/0

Both are date models but mine is a later version I guess.

My dial has been poorly refinished.

Guys will a yuki snowflake dial fit all of the eta movements??

I have a 2783 in my watch that has a refinished dial and don't want to make a mistake in ordering a 9411 dial for a 94110 if there is a difference.

Thank you everyone for all your help. I have the parts ordered now. You are very kind,

Yes I really need the part number for the "Tall" parts this is an 18kt watch with thick dial and regular hour and seconds and too short to clear dial.

Thanks brother,

Hello guys, Thanks for having such a great place to explore and learn.

I am in need of some assistance.

I am looking for certian parts but cannot seem to find any exact answers.

I know some members here have access to and sell parts for eta but I cannot find exactly who to talk to.

I am in need of a tall hour wheel and tall seconds wheel for eta 2834-2

I will post a WTB if nessasary but it seem that the WTB section gets the least hits and maybe my post would be missed

Thanks in advance for any help you can provide or for anytime you spend reading this,

Before it quit

Ok guys I am an impatient spoiled bastard and just ordered another Yuki clone. 

We will see what happens this time. Atleast I will have a pile of parts to send someone if I need to get this one fixed, 

Wish me luck. 

When the yuki stops working who should I send it to??

Hey guys. I don't know if any of you have read any of my introduction thread but I have gen watches but love to tinker and I respect both sides of the rep/gen world and enjoy reading your input and looking at your projects. 

Ok mini introduction done, 

I have a 16000 case set and many gen dials and bezels, hands, Crowns, tubes, crystals, that will fit it. 

I am short a gen movement to make it a watch in my rotation.

I was stupid enough to buy Yuki clone movement just to have it break in just two weeks. (never worked right from the start)

Now I have a broken Yuki movement (in Pieces because I was determined to see what was wrong with it, I don't care about the money I wasted I am just glad I am done with that junk)

I have a domed plastic crystal in my parts that fits this case very good and tight. I think it is a tropic 21 but I don't know since I have many crystals mixed up. 

sitting down with my mountain of parts makes me want to attempt some kind of a 1016 build. 

I have a messed up old YUKI 1016 dial that I used to see if it would fit so I could order another and try and put something together. 

It is a tad big to fit the case. So close though that I think I could shave one of their dials to fit the case. 

I know you guys know your Shi* and before I go ordering parts to only fail I thought I would upgrade my membership start contributing to the forum and ask for your help. 

Any and all suggestions will be greatly appreciated, 

Also one last though, Should I sell the case and move on after the Yuki movement failure. 

Its like being slapped by someone with a long reach. I have enjoyed playing with the parts they offer for years and have never had any problems, Now the movement fails at almost $300 and what can you do but get [censored] and give up. 

Thanks guys, BrotherSterling

I have all my parts at work so I will post up some pics on Monday,

Thanks guys. I have no problem paying for the Phong case. Any more pics of Plastic crystal Daytona's to feed my fever would be great!!!

I don't care about the movement being correctly marked. I just want it to fit a gen Dial.

I also don't care which model as long as it is Plastic crystal

So give me a top end ball park, $2500??

Hey again. I know no body knows me here but I do like the way everyone seems to help each other.

On my last post at the bottom I mentioned I am searching for a built Daytona with the right movement.

My question is do these not come for sale very often??

Am I better off just starting to try and build my own??

ANyhow here are some of my watches and Straps. Hope everyone is having a great weekend.

some genuine watches.

I have in the past built up watches and have been through a million problems with dials, hands and cases. A while back I was going to build a 5508 but God reached down from heaven and handed me one.

Recently I installed a Explorer style dial in a 1018 and previously I have swapped movements and cases only to find problems with Datejust calendars being different than Submariners and so on.

I have also found that aftermarket seconds hands rarely fit good and often the center seconds pinion is too large to fit into the tube on the seconds hand. Anyway here are a few pics.

I have posted a few times here but this is kind of a reintroduction. I want to build a Plastic crystal Daytona with V72 and Texas dial but really what I want is to just buy one already done for me. ANyone know how much I should pay for a completed project like that??

Ok won't fit.

Thanks for the response Andy. I am going to (Hopefully) put away the Chapter Ring Dial and the 390 and install the 1570 and refinished 5513 dial so I can enjoy the watch while preserving the original dial in a deep dark safe.

I have heard they are very close to being the same. If I had a later model I would not even try,

Good gentlemen of the forum can you tell me if 7928 submariner case will fit a Rolex 1570 movement???

I have both and wanted to know if maybe you guys could tell me if it would fit before I uncase the 390 that the 7928 currently houses

Thanks so much,

OH YOU MEAN LIKe this? Ok well I didn't have my hearing aid in.

THE MONEY TO GET A PHONG 5508 CASE COMPLETE THAT I HAVE A SPECIAL FRESH CLEAN AND SERVICED 1570 MOVEMENT FOR. I WILL BE POSTING PICS FROM MY PHOTOBUCKET OF THE WHOLE PROCESS SO YOU GUYS CAN ENJOY ALSO. I HAVE DECIDED TO FORGO THE "AGING" PROCESS AND MAKE MY 5508 FRESH NEW AND CLEAN.

I WILL TRY OUT A PIC FROM MY PHOTOBUCKET NOW.

OK JUST SAW THIS SORRY

Hey I have a 16014 case totally complete minus movement dial and hands,

Could I Franken a ETA Explorer 1 out of it some how? Thanks in advance for anytime you spend reading this or replying to it, BrotherSterling