Rolexfinder Posted January 17, 2010 Report Share Posted January 17, 2010 Hello Guys, I just want your opinion if you are thinking to get the best rep that really close to genuine early pam manual winding (Pam 1a, 2a, and etc.), which model you want to get it first under the condition that the gen parts (case, crystal, dial, crown, crown tube, screws, Crown guard, caseback, and dials) of that model is able to get? This we are talking about starting all over again from scratch as EL is used to do. It will be 1:1 for that specific series. All suggestion are more than welcome. Thanks in advance for your opinion. Cheers, Paul Quote Link to comment Share on other sites More sharing options...
Tom Hawkes Posted January 17, 2010 Report Share Posted January 17, 2010 Wow. Any base dial + closed caseback + accurate and I am in. I don't think that we will be able to source the gen parts though.. Quote Link to comment Share on other sites More sharing options...
fishgodeep Posted January 17, 2010 Report Share Posted January 17, 2010 I would keep it simple and make acurate OP6502(18/19/20) Case set for PAM 001A, 002A, 003,A 004,A 009A, 010A - covering a lot of options. Gen parts - with the exception of all the dials can be sourced no problem - they key will be acdurate materials , artwork and CNC. I have Gen 002/009 , 001/004 and 003 Dials and there are Gen PAM 010 dials out there.High resolution images and measurements would not be too much of an issue. Good luck with the project!! FGD Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.