dieter111 Posted July 29, 2010 Report Share Posted July 29, 2010 I got myself a 300 and it's too sparkling new for my taste, so I will try to bring some tear&wear to it. But; When I was to about unscrew the two screws holding the movement I came across a problem. I can't get the screws out... They are under the case ring. Any ideas??? Thanks for looking! Quote Link to comment Share on other sites More sharing options...
DickBrowne Posted July 31, 2010 Report Share Posted July 31, 2010 Hi Dieter, counter-intuitively, you have to screw them all the way in, the ring will then turn. You can spin it to the position where one screw is where the stem comes through the case, take that screw out then spin it again so the remaining screw is at the same stem-entry position, no need to remove the second screw, the ring can be lifted out and then the movement. Simple! (but only when you know how ) Great watch to mod, by the way - I've just popped a pic of mine into the general section, nothing that shows the aging process that well, or results, but a story to tell Good luck with it - let's see some pics when you're done. Richard Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.