glennpenn Posted September 12, 2010 Report Share Posted September 12, 2010 I have a iwc 3714, which I bought 3 months ago, which just started to make some ugly noise when i try wind it, and the crown does not really turn.... Does anyone know what this is, and what I should do? Glenn Link to comment Share on other sites More sharing options...
concepta Posted September 12, 2010 Report Share Posted September 12, 2010 I have a iwc 3714, which I bought 3 months ago, which just started to make some ugly noise when i try wind it, and the crown does not really turn.... Does anyone know what this is, and what I should do? Glenn ...a movement that is taking its last breath... Link to comment Share on other sites More sharing options...
glennpenn Posted September 12, 2010 Author Report Share Posted September 12, 2010 Noooooooooooooooooooooooooooo, say it aint sooo!! Id love to get one of your gens, but I refuse to believe it! G Link to comment Share on other sites More sharing options...
Hugo Alves Posted September 12, 2010 Report Share Posted September 12, 2010 Maybe try to remove the crown/stem and place it back in again. Maybe something out of place there... just give it a try... Link to comment Share on other sites More sharing options...
glennpenn Posted September 13, 2010 Author Report Share Posted September 13, 2010 Thanks a lot Hugo! As I have no idea how to do this, it might be best to hand it over to a watchmaker, or is this super easy even for me to do? Glenn Link to comment Share on other sites More sharing options...
sander Posted September 13, 2010 Report Share Posted September 13, 2010 It sounds like your ratchet wheel is damaged and missing some teeth now. Because you will have metal filings in the movement, the only option is a complete overhaul and replacing the defective part. An asian ratchet wheel will be hard to find and a swiss won't fit. So it is not an easy problem. Link to comment Share on other sites More sharing options...
glennpenn Posted September 13, 2010 Author Report Share Posted September 13, 2010 Goddammit! I knew that the Portu is not flawless but I excpected it to last longer than 3 months. I got it from asian7750.com. Is there a warranty on these things? G Link to comment Share on other sites More sharing options...
nakortheblue Posted September 13, 2010 Report Share Posted September 13, 2010 Check with your dealer if anything can be done. Link to comment Share on other sites More sharing options...
Hugo Alves Posted September 13, 2010 Report Share Posted September 13, 2010 Hi Its as easy as it gets to remove the stem and put it back in again. unscrew the 4 screws in the backcase of the watch. Then the back case will become loose and expose the mechanism. Then press the small "reset-like" button (top arrow) and while pressing it down with something, push the crown out. To insert is just the same, insert the crown/stem while pressing the button down. Hope it helps... But best is if your dealer can exchange you the watch. regards H. Link to comment Share on other sites More sharing options...
glennpenn Posted September 13, 2010 Author Report Share Posted September 13, 2010 Hugo, thanks a bunch!!! G Hi Its as easy as it gets to remove the stem and put it back in again. unscrew the 4 screws in the backcase of the watch. Then the back case will become loose and expose the mechanism. Then press the small "reset-like" button (top arrow) and while pressing it down with something, push the crown out. To insert is just the same, insert the crown/stem while pressing the button down. Hope it helps... But best is if your dealer can exchange you the watch. regards H. Link to comment Share on other sites More sharing options...
sander Posted September 13, 2010 Report Share Posted September 13, 2010 Hello Link to comment Share on other sites More sharing options...
Hugo Alves Posted September 13, 2010 Report Share Posted September 13, 2010 Hello Link to comment Share on other sites More sharing options...
nakortheblue Posted September 13, 2010 Report Share Posted September 13, 2010 If it is a rachet problem, it should be an easy and hopefully, cheap fix. It should give the movement a few more months of life before the secs@6 timebomb rears its ugly head. Link to comment Share on other sites More sharing options...
Hugo Alves Posted September 13, 2010 Report Share Posted September 13, 2010 (edited) If it is a rachet problem, it should be an easy and hopefully, cheap fix. It should give the movement a few more months of life before the secs@6 timebomb rears its ugly head. If its a ratchet problem, that can happen when you frequently manually winding a watch with a 7750 movement the most common sintom is that the watch will show a poor power reserve. Dont know if this is the case, but if thats the problem i am offering myself to send you one Glenn. @nakortheblue unfortunately cheap is relative... since i dont know any watchsmith charging less than 80 euros for a service (not including parts) when a new movement is around $75... still just try to get your dealer to change the watch... Edited September 13, 2010 by Hugo Alves Link to comment Share on other sites More sharing options...
sander Posted September 13, 2010 Report Share Posted September 13, 2010 I will pretend i didnt even hear this part... First of all, i dont see in his post that he didnt touch it before.. it could be a case of bad assembly from the beginning, or yes could be the case of something broken inside, inclusive the ratchet wheel that you suggest. I also did heard him saying he can normally pull the crown in and out and set the time... he said that the crown does not turn... The stem can be fully in, even being able to set the time, but not correctly inserted... You might be right but there is nothing like an easy check before sending the watch to be repaired. Anyway it will be probably cheaper to get a new movement than sending it up for servicing (although not the same thing of course) And we all know that most of them sooner or later are going to die anyway... so not sure whether its really worthy to pay for a servicing unless you know it going to last... just my 2c Sorry mate but you are very wrong. If the stem is not in the right place, there is no way to push the stem fully in and out and set the time. You actually might be able to wind it without a problem though Link to comment Share on other sites More sharing options...
Hugo Alves Posted September 13, 2010 Report Share Posted September 13, 2010 Hi Sander I never said i was right, just said it would probably be worthy to have a look before sending the watch to repair... Dont get me wrong i am not against movement servicing, in contrary, but what is the common believe from many many watchsmiths is that the seconds at 6, are just wrongly designed and since there are no jewels in the extra gears added, the movement is faulty be design, and while there are some movements working for a long time (i am a lucky one, have one for 2 years), several other ones that i had just stopped. I am quite sure you know it better, that many and i mean, the vast majority of the seconds at 6, will stop eventhough they are serviced, because its not a lack or oil/over oil, or dust problem, its a trackion problem combined with some really bad design. Switching a new movement for sure will cost money, but not even a third of what a service will cost. Now just talking about myself, in this case i would prefer to get a new movement, use it while it lasted and then if i really liked the watch, i would get a gen movement or if the movement lasted like mine is lasting, than it would be probably worthy to get it serviced... but this is one in many many movements that will last this long. but hey, this is just what I would do. I would take Sander advise though and check the gear. Here is another picture, although i think Sander's picture is quite clear... and good luck Link to comment Share on other sites More sharing options...
glennpenn Posted September 13, 2010 Author Report Share Posted September 13, 2010 Hi guys and thanks for the enthusiasm and useful information!!!!! I pulled out the crown thing, and put it back in...nothing changed. However after winding it just one round, it Link to comment Share on other sites More sharing options...
glennpenn Posted September 14, 2010 Author Report Share Posted September 14, 2010 Craporama! The power reserve is now dead as well! Contacting asian7750.com now... G Link to comment Share on other sites More sharing options...
Hugo Alves Posted September 14, 2010 Report Share Posted September 14, 2010 too bad G, best thing is then try to get a replacement from Asian7750, if not then you have to decide what to do... Link to comment Share on other sites More sharing options...
glennpenn Posted September 20, 2010 Author Report Share Posted September 20, 2010 Finally got an reply from Asian. He has agreed to repair the watch;-) G Link to comment Share on other sites More sharing options...
Hugo Alves Posted September 21, 2010 Report Share Posted September 21, 2010 great news.. thats the best Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now