rmcsherry Posted October 5, 2006 Report Share Posted October 5, 2006 I'm trying to find a metal movement spacer ring for a 47mm case. The outer diameter is approx. 40mm, yet the inner should be 35mm, not 36mm like the unitas movements. I assume a custom job would be very expensive, although I've not looked into this yet. Any ideas? Link to comment Share on other sites More sharing options...
r11co Posted October 5, 2006 Report Share Posted October 5, 2006 I'm trying to find a metal movement spacer ring for a 47mm case. The outer diameter is approx. 40mm, yet the inner should be 35mm, not 36mm like the unitas movements. I assume a custom job would be very expensive, although I've not looked into this yet. Any ideas? How's about making a 1mm thick packing ring from alu plate? Link to comment Share on other sites More sharing options...
slay Posted October 5, 2006 Report Share Posted October 5, 2006 I always put a piece of paper between the movement+spacer ring. that holds the movement in place and is not visible when the caseback is on! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now