redwatch Posted May 14, 2011 Report Share Posted May 14, 2011 Hi folks, My poor 112h case has had a rough time lately and its in need of replacement. (basically I f*k'd it up trying to enlarge the hole for a new tube) So..... anyone got any good recommendations? I know that the Little Hero cases are supposed to be nice, but I would imagine they are a little pricey. Also, it would be super awesome to find a case that has a proper caseback without the H0035 serial number on it. That really drives me crazy for some odd reason I have a torobravo CG and a T crown and tube already so I just need the caseset and caseback. Crystal isn't necessary, but if it comes with it than that is ok. I hope you guys can help. It would be really great to have my PAM back in wearable condition! Link to comment Share on other sites More sharing options...
ATEspo Posted May 14, 2011 Report Share Posted May 14, 2011 (edited) I was in the same situation about a month ago, I've had a DSN cased Little Hero 112 for a few years and wanted to replace the case/crystal since they were really beat up. I went with a 111J case, 005 Crystal and 111J caseback. Im going to reuse my LH dial/hands, LH movement and the thick crown. I also think i'm going to have to use the 111J CG (instead of my LH CG) to stick with the "J" series and a rollerball lever. Plus I just found out if you want to use a non-rollerball lever with these new pam cases you need to change out the hex crown tube (see link), which I dont want to get into right now. http://repgeek.com/showthread.php?t=136950 Edited May 14, 2011 by ATEspo Link to comment Share on other sites More sharing options...
redwatch Posted May 17, 2011 Author Report Share Posted May 17, 2011 I went with a 111J case, 005 Crystal and 111J caseback. Im going to reuse my LH dial/hands, LH movement and the thick crown. I also think i'm going to have to use the 111J CG (instead of my LH CG) to stick with the "J" series and a rollerball lever. What was your source for the 111j case? Any other options out there? I'd like to find a good case to use with my 'T' tube and crown with my Torobravo CG. I am also thinking of switching out the dial for a newer PAM 219 sandwich dial as the 6 and 9 look quite a bit nicer Link to comment Share on other sites More sharing options...
ATEspo Posted May 18, 2011 Report Share Posted May 18, 2011 I picked my case/crystal up off of Sead. if you keep your eyes on the parts section they pop up from time to time. The 005/219/318 is also a good case just not as perfect as the 111j and they also pop up for sale quite often. Link to comment Share on other sites More sharing options...
kdspiv Posted May 21, 2011 Report Share Posted May 21, 2011 Does this mean the plain old non roller crown guard cases are going to slowly not be manufactured by the rep makers anymore? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now