Suggestion For Overcoming Sub Hand Post Sizes

[Finepics]

As we know the newer asian 7750's in the TAG link chrono's have larger hand posts for the subdials which means anyone swapping a gen 7750 into it will need to strip the movt to remove the gears from the asian and put them into the swiss. if you have a look on O'Frei they sell sub seconds hands for the Omega cal 1152 (which is a 7750) that look the same and are 3.70mm long (not sure of the length of the TAG hands). These would be for the TAG that has the parallel sided sub hands such as the grey dial chrono with the tachymetre bezel. Then you would only need to swap the centre second hand wheel from the asian to the the swiss. I could be wrong but if someone could measure their sub hands length we will know for sure but they cannot be far out. They are just $7.90 (not sure if that's each or the set).

Check out O.Frei here and scroll to just over half way down the page:

http://www.ofrei.com/omega-watch-hands-caliber-1152.html