Maven Posted January 25, 2013 Report Share Posted January 25, 2013 (edited) I recently bought a 45.5mm PO and I have no issues with it except for the bezel. If you look closely in the picture you can tell the 20 is resting right up next to edge. I'm wondering if this can be corrected be poping the insert out and moving it, or if its a bad bezel and needs to be replaced. Edited January 25, 2013 by Maven Quote Link to comment Share on other sites More sharing options...
the_rymeister Posted January 27, 2013 Report Share Posted January 27, 2013 From the pics it looks like a poorly printed bezel insert buddy. I'd you don't want the expense of fitting a genuine insert have a look on EBay as there are some decent aftermarket inserts on the for a small amount of money Quote Link to comment Share on other sites More sharing options...
Maven Posted January 30, 2013 Author Report Share Posted January 30, 2013 (edited) Ya the pearl is off centered to , driving me crazy. I got no problem buying another but through my research it appears the have a piece in the middle that sticks out and has to be filed down, the gen that is. And they only ones I've seen on the bay are the ones from wholesaleoutet which I've been told are gen spec and don't fit rep bezel any ideas. Edited January 30, 2013 by Maven Quote Link to comment Share on other sites More sharing options...
Maven Posted January 30, 2013 Author Report Share Posted January 30, 2013 (edited) I recently read your mod post didn't realize it was your post lol, any chane you might be willing to do this? If I had the insert shipped to you , you break it no worries Edited January 30, 2013 by Maven Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.