Question regarding AP 15400

[zuluparuk]

Hi guy, so i have a question that needs clarification. I apologize if it's been answered here before but I would love a straight forward answer because the couple that I've gotten have been the opposite. Simply, can the AP 15400 be adjusted to fit a 6.4 inch wrist? I've been told it can by a dealer, and I've been told it can't be by another person. So if someone could help me out that would be very much appreciated.

Cheers and thanks

[zero_deficit]

i'm 6.7 and have removed 2 of 6 removable link, there's also a review somewhere by someone with a 6.5 who removed 3 of the 6 links. I'm fairly certain it'll be fine on a 6.4.

 

There might be confusion with the Royal Oak OFFSHORE bracelet which may not suitable for <6.5

[zuluparuk]

Nicee. Thank you for the advice. I'm excited to look for and get a 15400. I'm glad to know that it can be worn on my wrist properly.

I know the offshore is absolutely out of the question for me. It would look pretty intense.

So just to make sure. The AP 15400 is also known as the RO Jumbo ya?

Thanks a lot for the reply. I really appreciate it mate

[zero_deficit]

  On 9/30/2013 at 11:32 PM, zuluparuk said:

Nicee. Thank you for the advice. I'm excited to look for and get a 15400. I'm glad to know that it can be worn on my wrist properly.

I know the offshore is absolutely out of the question for me. It would look pretty intense.

So just to make sure. The AP 15400 is also known as the RO Jumbo ya?

Thanks a lot for the reply. I really appreciate it mate

 

Glad to be of help mate

 

The 15400 is not the Jumbo, that's the older 15300 which is 39mm. I guess it was considered 'jumbo' a while ago when it came out compared to even smaller RO back then

[Doofus]

  On 10/1/2013 at 4:56 AM, zero_deficit said:

The 15400 is not the Jumbo, that's the older 15300 which is 39mm. I guess it was considered 'jumbo' a while ago when it came out compared to even smaller RO back then

The Jumbo is actually the 15202 and not the 15300.

[jeruksaring@live.com]

hi was wondering if its easy to take off the links? and any specific screwdriver to take it out? thanks so much

[zero_deficit]

  On 10/2/2013 at 7:16 PM, jeruksaring@live.com said:

hi was wondering if its easy to take off the links? and any specific screwdriver to take it out? thanks so much

 

any flat head screwdriver around 1.2mm should suffice