darknight007316 Posted December 9, 2013 Report Share Posted December 9, 2013 Hey guys. Noob here. I have a quick question some might be able to help me with. The HE valve on my CrPO fell off and I got a replacement. It won't just screw back on though. Do I need to open up the back or is there a trick to it? Thanks in advance! Link to comment Share on other sites More sharing options...
sputim Posted December 9, 2013 Report Share Posted December 9, 2013 Had the same issue. There is no hole in the case so opening the case and taking out the movement is not the way to go. You have to unscrew the he valve screw from the smale plate which should be attached to the new one and then on the watch itself there is like a thin stick which you have to pull out with a tweezer. Then you should be able to screw it back but be a little patient and let yourself time Link to comment Share on other sites More sharing options...
darknight007316 Posted December 10, 2013 Author Report Share Posted December 10, 2013 Thanks for the reply. A little confused though. Where is the small plate? I don't know if there's anything attached to the new one. Thanks! Link to comment Share on other sites More sharing options...
indywatchguy Posted December 13, 2013 Report Share Posted December 13, 2013 I had the same issue with my BP CrPO. I used tweezers to hold the stem and twisted the HE valve back on. It's tedious but doable. That's one of of a few reason why I got rid of mine. I now own the LMPO which is a much better Omega rep. Hope this helps. Link to comment Share on other sites More sharing options...
darknight007316 Posted December 13, 2013 Author Report Share Posted December 13, 2013 How far should the stem come out? It doesn't seem to come out enough for me to hold it with the tweezers and screw the valve back on. I'm still really confused. How do you unscrew the he valve screw as posted by sputim? Thanks again. Link to comment Share on other sites More sharing options...
indywatchguy Posted December 15, 2013 Report Share Posted December 15, 2013 The HE valve screws onto the stem which has threads on end like a bolt. You have to somehow stabilize the stem so you can screw HE valve on it. Maybe try a small flathead watch screw driver. I can't remember but it may have reverse threads which means you have to turn HE valve counterclockwise. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
darknight007316 Posted December 15, 2013 Author Report Share Posted December 15, 2013 (edited) Man I'm having a heck of a time getting this done. It doesn't seem like there is enough stem for me to wedge a precision screwdriver to stabilize it. How much is it supposed to come up?is there someone conus I can send it to to get fixed? Thanks! Edited December 15, 2013 by darknight007316 Link to comment Share on other sites More sharing options...
indywatchguy Posted December 16, 2013 Report Share Posted December 16, 2013 Katt in Minnesota does work. I could probably fix it but no guarantee. Try holding the watch HE valve side down, let gravity work for you then twisted HE cap counterclockwise til it catches the threads ooooor you could just screw it on and forget connecting to stem. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
darknight007316 Posted December 17, 2013 Author Report Share Posted December 17, 2013 It won't screw on even if I try to forget about connecting to the stem. Do you have Katt's contact info? Thanks! Link to comment Share on other sites More sharing options...
sputim Posted December 17, 2013 Report Share Posted December 17, 2013 I can remember that it was hard but I managed to do it in about 5 min. Post a pick of the HE valve you got. Maybe the plate I am talking about is still on. Let me see. Link to comment Share on other sites More sharing options...
darknight007316 Posted December 18, 2013 Author Report Share Posted December 18, 2013 (edited) Thanks in advance for your help sputim! I'm pulling my hair out trying to fix it! Edited December 18, 2013 by darknight007316 Link to comment Share on other sites More sharing options...
indywatchguy Posted December 18, 2013 Report Share Posted December 18, 2013 Easy fix bro try to secure stem with a toothpick. You have to thread HE valve onto stem. Sent from my iPhone using TapatalkLook under repair section for Katt Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
sputim Posted December 18, 2013 Report Share Posted December 18, 2013 Ok the one I received from adrew tt had something more on it I first had to take away (the small plate I was talking about). Yours definitely look fine. So just try to do as Indy recommended. And for me it worked aswell with using gravitatino as help Just take yourself 10min of time and be a little patient and you will fix that on your own It was hard for me as well but you will manage it Link to comment Share on other sites More sharing options...
indywatchguy Posted December 19, 2013 Report Share Posted December 19, 2013 Yea I agree it was a bugger to fix, took patience and a steady hand but YOU CAN DO IT! Link to comment Share on other sites More sharing options...
sputim Posted December 26, 2013 Report Share Posted December 26, 2013 Did you manage it? Link to comment Share on other sites More sharing options...
darknight007316 Posted December 27, 2013 Author Report Share Posted December 27, 2013 No:( it's really weird. It's like it's the wrong size or something. Even the outer threads won't catch much less getting it to attach to the inner stem. I might have to send it out. Thanks for all of the help and encouragement though! Link to comment Share on other sites More sharing options...
indywatchguy Posted December 27, 2013 Report Share Posted December 27, 2013 No:( it's really weird. It's like it's the wrong size or something. Even the outer threads won't catch much less getting it to attach to the inner stem. I might have to send it out. Thanks for all of the help and encouragement though! I'll PM you Katt's info....he's very selective about what work he takes these days. Unfortunately MD2020 was a good watchsmith but is no longer around. He was my go to guy and did all my work no matter how small it was. At this point Katt is the only one I know of. Anyone else know a good rep friendly watchsmith???? Link to comment Share on other sites More sharing options...
sputim Posted December 27, 2013 Report Share Posted December 27, 2013 Oh sorry to hear that. I know how despreta something like that can get :/ Somehow I don't think its a sizing problem it could be possible. Best tip I can tell you and which was said alraeady is to pull out this inner "stick" a little bit out of the case (it's only about 1mm) and then held the watch that it points to the bottom (use gravitation as ur friend). Then you should slowly try to screw in the HE valve. Problem is that on the HE valve there are like 2 screw threads and subsequently the "stick" must be aligned correctly. Try it again. I can remember that I had to pull the little "stick" out several times and held the movement upside down until it worked Good luck again Link to comment Share on other sites More sharing options...
darknight007316 Posted December 29, 2013 Author Report Share Posted December 29, 2013 I'll give it another shot. Thanks for the encouragement. I don't know how it even came off in the first place seeing how hard it is to get on! Who designed this thing hahahaha? Link to comment Share on other sites More sharing options...
sputim Posted December 29, 2013 Report Share Posted December 29, 2013 Problem is that its not gen like construction. If it was one wouldn't be able to unscrew the HE valve completly. Good luck Gesendet von meinem iPhone mit Tapatalk Link to comment Share on other sites More sharing options...
darknight007316 Posted March 3, 2014 Author Report Share Posted March 3, 2014 Well I guess after months of trying to get this fixed I'm having no luck since I was sent the wrong part and I can't source another. Does anyone know how much a gen he valve would cost me in parts and labor to put in, and who could do the work conus? Thanks again for everyone's help! Link to comment Share on other sites More sharing options...
fraggle42 Posted March 4, 2014 Report Share Posted March 4, 2014 I think gen HE crown, valve and tube would be around $120, how much to fit depends on who you use. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now