Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Any info about this movement? Swiss Eta 2836-2 Modified to Rolex Calibre 3135 Markings and Bridges, Automatic Movement, 25J, 28800bph


Recommended Posts

It's a ETA 2836 movement that has been modified to look like a 3135. It's likely not really a Swiss, any one that knows anything about movements will know that it's not a real 3135 and it costs more than a standard 2836.

What else would you like to know?

Link to comment
Share on other sites

so basically a Eta 2836-2, really don't mind to have it transformed as 3135, a good eta is enough.

I want to buy a bp sub c, so, don't know if buy the cheapest powered by asian 2813 and then replace it for a gen eta 2836-2 or spend 170 usd more and get the bp sub c with that movement and leave it as is.

asia 2813 has the same size of 2836-2?

what do you think mate?

 

thanks in advances, very kind of you

Link to comment
Share on other sites

21J: Buy if you want a cheap movement, that can be cheaply replaced should it stop working. Will most likely come in low-beat, though high beats are available sometimes (not as reliable)

A2824/2836: Buy if you want a reliable workhorse. Can be serviced or replaced with another A28xx or Swiss ETA.

A3135: Buy if you want to spend extra money on a movement that hardly looks like a genuine 3135 and comes with many reliability problems.

Link to comment
Share on other sites

Why replace the Asian 2836? Just have it serviced and it'll work just as good as the Swiss version. I mean if you want to waste money I'll give you my PayPal and you can send me $200 bucks just for the hell of it....

:partytime:

Link to comment
Share on other sites

well, here I can get a eta 2836-2 for 90€….I just don't like chineses movement, for me it's just asian s**** prefer put in a swiss stuff which I know it is good!

I could try for sometime…but don't trust in it. ;)

Better you send me the 200 bucks, and I can buy the gen crystal mate !

Link to comment
Share on other sites

Well read around, after a service these Asian "POS" movements run just as good as Swiss. Or, just run it until it gives you major issues then replace it with a Swiss. Likely that swiss eta will need a service just the same.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up